Powered by GitBook

1 of 1

Loading...

Upload configuration to the logger via FTP

This step-by-step guide explains uploading a new configuration to the FTP Server by placing the .rxc file in the logger root folder.

Step 1

Note:

Before you begin the steps, ensure your logger is connected to the server with an existing configuration.

Make the new configuration.
Enable FTP from the Device Configuration menu.

Note:

Set your configuration check time in the given section while enabling FTP.

Step 2

Save the Project with the name you require for the configuration.
Under the ‘Config’ tab, select Export from the drop-down menu.
Select ‘Export ReXgen Configuration (rxc)’ from the listed options.

Step 3

Save the file with the desired name.
Click ‘Save’.
Once saved, rename the file as ‘config.rxc.’

Note:

Ensure that you rename the file as 'config.rxc' only.
If the xml is custom-made, ensure to change the guid of the xml file whenever it is sent through the server.

Step 4

Upload the configuration file to your FTP folder by adding it to the root folder of the logger.

Note:

Once the USB is removed, only then the logger will connect to the server and upload files.