There is one 9-pin Standard D-Type connector.
The connector needs to be tightened properly to make a proper connection, ensuring reliable operation.
Each end of the CAN bus must be terminated with a 120 Ohm resistor across CAN H & CAN L.
Do not short-circuit any pins.
The maximum safe applied voltage for analogue and digital I/P is +/- 28 V.
Pin No
Pin Function
Pin 1
NC
Pin 2
CAN-Low
Pin 3
GND
Pin 4
Nc
Pin 5
Power GND
Pin 6
NC
Pin 7
CAN-High
Pin 9
Power Supply+5 to +27V