Test the connection with Streamlog Assistant. If the CN light is Bold, it means connected, and the logger can be seen in the stream log under connection status. (Please ensure the USB is not connected) Refer Rebel Support page for the instruction manual.
It can be assigned on the Stream Channels tab on the configuration page.
It is recommended between 10 to 15 critical parameters, As we have to pack the data per the bandwidth provided by the telecom provider.
No, that would not be possible directly. Our data loggers are end-to-end encrypted. You will need to have a streamlog to see data online.
No, each Stream DAQ has its limit. The limit depends on the size of each parameter added.
Please ensure that you have installed the driver. If not, you can find it under the influx technology folder under the start menu.
CAN live view, filter, trigger, sleep modes, and DBC options.
Ensure the ReXgen Driver is installed on your computer; refer to the ReXgen Support page for instructions.
Make sure that Visual C++ Redistributable x64 is installed. Click here for all software links
There are three available versions, namely, DiaLog plus, DiaLog std, DiaLog log config.
Yes, by using the Batch processing option in the DiaLog Plus version.
The Logger RTC battery might be drained. Interface logger and Reset the time. Please ensure the logger date and time is synced with the PC.
There could be several reasons:
Check the USB Cable.
Confirm if the SD card is present in the logger (If not, please insert the SD card in the logger and format it once from the DiaLog software).
Contact Influx Support.
Open the Licence Manager from the DiaLog Help section.
Note down the Activation identification code, and deactivate the Licence from the existing PC.
In the new PC, use the I Moved from Another PC option.
The standard SLA period for DiaLog Software is one year (Key-based and Dongle-based Licence can be purchased with a longer SLA duration); once the SLA period is complete, the software will start showing the Licence Expiry notification. Once the Licence expires, you will no longer be eligible to get New software or firmware updates. The GNSS Map overlay feature in the DiaLog Plus Version will be disabled as it is subscription-based. All the other functions will not be affected.
The K-Box is designed to be part of a robust data acquisition team. While it can't log/save data independently, connecting it to a CAN datalogger or interfacing it with K-Cal software enables extensive data capture. Combined with a datalogger, the K-Box transforms into a data acquisition powerhouse, giving you a comprehensive picture of your system's health. Whether you choose a CAN datalogger or K-Cal software, the K-Box is designed to integrate seamlessly and empower you with the data you need to optimize your system's performance.
After interfacing the desired K-series device with the K-CAL software, you can generate a DBC file for any K-series device.
KTC8 and KTC16 can be powered via an external USB if the USB can supply enough power, but it is not recommended to use a USB for powering the device.
Yes, several K-series devices can be connected on a single CAN Bus.
The K-Cal software allows you to name and customise the CAN Identifiers.
ReXdesk
DiaLog
K-CAL
StreamLog
Module Analyser
