1 of 1

Pinout of the Multi Connect Cable

The Standard Display Cable may be connected to the multi-connect cable's AUX cable to connect it to the Rebel CT or LT Loggers. The pinout is as follows:

AUX (The port of the Multi Connect Cable that is typically used with the Rebel Dash)

CAN+PWR (This Connector is used to power the Logger; e.g. it could be powered via the diagnostics connector of a vehicle connected to the OBD2 to DB9 Cable.)

Digital/Analog (This Connector connects Digital and Analog signals to the Logger.)

LAN/CAN (Used for connecting CAN2 and Ethernet to the Logger.)

OBD&INST (The multi-connect cable attaches to the Logger via this connector.)

Note:

Pins not mentioned in the description table(s) are NC.

Pinout of the Multi Connect Cable

The Standard Display Cable may be connected to the multi-connect cable's AUX cable to connect it to the Rebel CT or LT Loggers. The pinout is as follows:

AUX (The port of the Multi Connect Cable that is typically used with the Rebel Dash)

CAN+PWR (This Connector is used to power the Logger; e.g. it could be powered via the diagnostics connector of a vehicle connected to the OBD2 to DB9 Cable.)

Digital/Analog (This Connector connects Digital and Analog signals to the Logger.)

LAN/CAN (Used for connecting CAN2 and Ethernet to the Logger.)

OBD&INST (The multi-connect cable attaches to the Logger via this connector.)

Note:

Pins not mentioned in the description table(s) are NC.