LogoLogo
Home
  • 🏠Home
  • Rebel Dash
    • Rebel Dash: Product Manual
      • Connecting the Rebel Dash to a CT or LT Logger
      • Technical Specifications
      • The Rebel Dash Software
        • Installing the Rebel Dash Config Software
        • Configuring the Rebel Dash using the Rebel Dash Software
          • Creating a Configuration Ready to send to the Rebel Dash
          • Installing the Kvaser Drivers
          • Sending the Configuration via the CAN bus through a Kvaser Device
          • Sending the Configuration via USB stick
        • Updating the Firmware in the Rebel Dash
      • Configuring the Rebel Dash using DiaLog
      • Using the Rebel Dash to Display the Signals
        • Config Menu
          • CAN Viewer
        • Changing between Signals
        • Changing the Display Mode
      • Pinout Details: Rebel Dash
        • Pinout of the Rebel Dash Cable
        • Pinout of the OBD2 to DB9 Cable
        • Pinout of the Multi Connect Cable
Powered by GitBook
On this page
Export as PDF
  1. Rebel Dash
  2. Rebel Dash: Product Manual
  3. The Rebel Dash Software
  4. Configuring the Rebel Dash using the Rebel Dash Software

Sending the Configuration via USB stick

PreviousSending the Configuration via the CAN bus through a Kvaser DeviceNextUpdating the Firmware in the Rebel Dash

Last updated 1 year ago

Prepare the configuration for the Rebel Dash.

Insert a FAT-32 formatted USB stick into the PC or Laptop.

Notes:

  • The USB stick must be compatible with the Rebel Dash and physically small enough to fit into the USB socket on the Rebel Dash. Influx Technology can provide suitable USB sticks. If you need one, contact Influx Technology.

Click on the Conf USB button.

Select the root of your USB stick.

Safely eject the USB stick from the PC.

Insert the USB stick into the USB port of the Rebel Dash.

Wait while the following message is displayed, ensuring the power is not removed and the USB stick is not removed.

When you see the following message, please remove the USB stick.

Wait for the Rebel Dash to reboot for a few seconds, and it will be ready to be used.

How to send the configuration to Rebel Dash via .

USB stick