The CAN viewer allows the user to view the CAN message on the CAN bus, decoded in hexadecimal format, along with the identifier and the time stamp.
Select the "STATS" by pressing the "Select" button to show a brief overview of the CAN messages being received and transmitted on the CAN bus.
The Config Menu of the Rebel Dash device, which allows the user to change the device's settings, is accessed by holding the View Key for 1 second.
To Navigate to Options, press the '^' and 'v' arrow buttons until the desired setting is highlighted.
To toggle the option, press the '<' and '>' arrow buttons until the preferred option is highlighted.
To configure the selected option, press the 'Mode' and 'Select' buttons to represent the "left" and "right" functions to adjust it.
To select the transmission speed of the CAN bus signal on the device.
To set the time for the device to go into sleep mode when no CAN message is received.
Configure the device to produce a sound from the buzzer whenever a button is pressed.
To change the brightness of the LCD backlight by percentage.
To change the brightness on the keypad backlight by percentage.
To view the CAN messages received on the device.
Just press the '<' and '>' arrow buttons to change the signal to be viewed on display.
Change the mode to display the signal, e.g. from Meter Display Mode to Binary Display Mode press mode.
To change between single and multi-display, press view; using the select button then allows you to adjust to the quadrant you want to configure), then pressing the '<' and '>' arrow buttons allows you to change the signal to be viewed in that quadrant, and pressing mode allows you to change the display mode once you have finished press select again until nothing is selected.
To change the viewer mode on the Rebel Dash, press the "Mode" button to toggle the option.
Just press the '<' and '>' arrow buttons to change the signal to be viewed on display.
Press' Mode' to change the mode to display the signal from Meter Display Mode to Binary Display Mode.
Just press the '<' and '>' arrow buttons to change the signal to be viewed on display.
Press' Mode' to change the mode to display the signal from Binary Mode to Graphical Display Mode.
To change the mode of the display in a reading mode.
Just press the '<' and '>' arrow buttons to change the signal to be viewed on display.
Press' Mode' to change the mode to display the signal from Graphical Display Mode to Meter Mode.
To change the display option on the Rebel Dash, press the "View" button to toggle the option.
To view a signal in a single display.
Press "View" to change to Multi Display Mode.
To view the reading of multiple signals at the same time.
You may use the select button (press several times until you are in the quadrant you want to configure). Pressing the '<' and '>' arrow buttons allows you to change the signal to be viewed in that quadrant, and pressing mode will enable you to change the display mode once you have finished; press select again until nothing is selected.
Press "View" to change to List Mode.
To view the readings of the signals in a list.
Press "View" to change to Single Display Mode.
Once configured via the configuration program or Dialog (or not at all if you only want to use the CAN viewer), you are ready to use the Rebel Dash. The following gives details of
Changing between
Changing the Display
How to in the Rebel Dash.