• Up to 7x CAN 2.0 buses

• Up to 2x CAN FD buses

• Up to 3x LIN buses

• Up to 2x FlexRay channels

• 3x digital I/O

• 4x analog input (each channel can be calibrated independently)

• 18Hz GNSS with 1KHz xyz Accelerometer

• Supports protocols CCP, XCPOnCAN and XCPOnFlexRay, UDS (ISO14229), J1939, CAN FD (ISO Standard or Non-ISO Standard)*

• SDXC card data storage (up to 128GB)

• Galvanic isolation (USB, enclosure)

• IP65 dust and splash-proof cover– SD card securely housed behind a flip panel

• Low power consumption in sleep mode and WakeOnCAN or WakeOnSignal feature

Options:

• Internal GNSS module (up to 30Hz refresh rate, socket for external antenna)

• Internal 3D 1kHz accelerometer and 3D Gyro module

• Internal 4G LTE CAT 1 module

• Internal Wi-Fi module

• Larger capacity data storage SDXC cards available (up to 128GByte)

• Dialog Standard is required for data analysis/live data

• Dialog Plus is required for XCP/CCP or to connect to StreamLog

• Dialog Gateway for configuring CAN 2.0 gateway functions

• Extension cable to connect CAN 0/PWR to vehicle OBD Port (9-way D-Sub to OBD)

Description:

This 230 mm breakout cable is supplied with each Rebel CT data logger, making it suitable to connect devices compliant with the standard CIA 9-PIN D-Sub pinout directly to our data loggers.

The cable has one 25-Way D-Sub connector, which connects directly to the Rebel CT data logger and four 9-Way D-Sub connectors to connect up to the separate CAN buses as described here:

• POWER/CAN0 enables power and a CAN bus connected to the Rebel data logger—type- 9-Way D-Sub (Plug).

• AUX/CAN 1 enables a CAN bus to connect to the Rebel data logger and supply auxiliary power from the Rebel data loggers to other devices. Type -9-Way D-Sub (Socket)

• CAN 2 Type – 9-Way D-Sub (Socket)

• CAN 3 Type – 9-Way D-Sub (Socket

A 15-Way D-Sub (Socket) connector enables easy connection to the data logger analog and digital pins.

Tech Specs: