The USB Connector is a USB Series "B" Receptacle Interface.
Pin No
Pin Function
Pin 1
VBUS USB supply voltage 5V
Pin 2
Data- line of USB This signal utilises NRZI line coding
Pin 3
Data+ line of USB this signal utilises NRZI line coding.
Pin 4
Ground
The Rebel LT has the following connectors:
A USB Series "B" Receptacle Interface: for data transfer between PC and logger
A Male 25 pin Standard D Type connector with pins for:
1X ISO 9141 K Line
2X CAN channels
4X analog inputs
4X digital inputs/outputs
4.5 – 36V power supply and ground
4.5V instrumentation supply output
Ethernet
Logger wake up
SD card slot (externally accessible)
This 230 mm breakout cable is supplied with each Rebel LT data logger, making it suitable to connect devices compliant with the standard CIA 9-PIN D-Sub pinout directly to the data loggers.
The cable has one 25-Way D-Sub connector, which connects directly to the Rebel LT data logger and two 9-Way-Sub connectors as described here:
POWER/CAN0 enables power and a CAN bus connected to the Rebel data logger—type – 9-Way D-Sub (Plug).
AUX/CAN 1 enables a CAN bus to be connected to the Rebel data logger. This cable can also supply auxiliary power from the Rebel data loggers to other devices powered by the data logger—type – 9-Way D-Sub (Socket).
This cable is suitable for LT Data Loggers and can supply power directly to the K-Series modules or the Rebel Dash from the Rebel data loggers. This helps to make installing our data loggers and instrumentation modules easy and with fewer cables required.
Cable Length
230mm
Cable Thickness
24 AWG 0.5 mm
Connector A
25-pin D-sub (DB25) socket, compatible with Rebel CT and Rebel LTdata loggers
Connector B
9-pin D-sub (DB9) plug/nuts, pins compatible with CiA 303-1 (CAN 0 and Power)
Connector C
9-pin D-sub (DB9) socket, pins compatible with CiA 303-1 (CAN 1 and LIN)
Temperature
Operating temperature: -20degC to +80degC
Weight
142 g
Colour
Black
