1 of 1

PinOut Details

There are two connectors, a male and female 9-pin Standard D-Type connector.

Channel 0 Connector

PIN No DB9(Male with Nuts)

PIN Function PWR/CAN0/Digital/LIN

Pin 1

Digital 1

Pin 2

CAN/CAN FD 0 - Low

Pin 3

GND

Pin 4

LIN

Pin 5

Power GND

Pin 6

Digital 0

Pin 7

CAN/CAN FD 0 - High

Pin 9

Power Supply 5-31V

Channel 1 Connector

PIN No DB9(Female with Screws)

PIN Function CAN1/Clamp/Analog

Pin 1

GND A

Pin 2

CAN/CAN FD 1-Low

Pin 3

GND

Pin 4

Analog IN 0

Pin 5

GND A

Pin 6

Analog IN 1

Pin 7

CAN/CAN FD 1-High

Pin 8

Clamp-15

Notes:

The connector needs to be tightened properly to make a proper connection, ensuring reliable operation.
Each CAN/CAN FD bus end must be terminated with a 120Ω resistor across CAN H & CAN L.
Do not short-circuit any pins.
The maximum safe applied voltage for analog and digital I/P is ± 28 V.
Do not use the logger's USB port for stand-alone data logging purposes, as it may damage the USB port, which won't be covered under warranty.