ReXgen1 comes with an integrated cable with a 9-pin D-Type connector.
Notes:
The connector needs to be tightened properly to make a proper connection, ensuring reliable operation.
Each end of the CAN bus must be terminated with a 120Ω resistor across CAN H & CAN L.
Do not short-circuit any pins.
Do not use the logger's USB port for data logging, as it may damage the USB port, which won't be covered under warranty.
PIN No DB9 (Male with Nuts)
PIN Function PWR/CAN0/Digital/LIN
Pin 2
CAN - Low
Pin 3
GND
Pin 5
Power GND
Pin 7
CAN - High
Pin 9
Power Supply 5-31V