Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
1 – External GNSS antenna connector.
5 – Mounting Holes.
2 – Micro USB connector.
6 – Channel 1 Connector.
3 – Channel 1 LED.
7 – Channel 0 Connector.
4 – Channel 0 LED.
Functions
ReXgen 2
ReXgen 2 IMU
CAN Interfaces
2 x CAN/CAN FD
ISO 11898-1: Compliant with CAN (up to 1 Mbit/s)
ISO & Bosch CAN FD (up to 8 Mbit/s)
Conforms to CAN protocol version 2.0 - part A, B
Max 20000 mps
Meets the requirements of ISO 11898-2:2016 & ISO 11898-5:2007 physical layer standards
2 x CAN/CAN FD
ISO 11898-1: Compliant with CAN (up to 1 Mbit/s)
ISO & Bosch CAN FD (up to 8 Mbit/s)
Conforms to CAN protocol version 2.0 - part A, B
Max 20000 mps
Meets the requirements of ISO 11898-2:2016 & ISO 11898-5:2007 physical layer standards
CAN/CAN FD Functions
Supports custom baud rates
CAN/CAN FD Bit timing selection
SAE J1939 support (Source Address, Destination Address & PGN Filters)
Silent Mode Configurable
CAN DBC Support
CAN frame error detection
Supports custom baud rates
CAN/CAN FD Bit timing selection
SAE J1939 support (Source Address, Destination Address & PGN Filters)
Silent Mode Configurable
CAN DBC Support
CAN frame error detection
LIN Interface
1 x LIN (up to 20 K Baud with LIN-Compatible Output Driver)
1 x LIN (up to 20 K Baud with LIN-Compatible Output Driver)
Inputs
2 x Digital and 2 x Analog (max sampling rate-1KHz)
2 x Digital and 2 x Analog (max sampling rate-1KHz)
Positioning & IMU Sensors
Positioning & IMU Sensors
GNSS
NA
Up to 18 Hz rate
GNSS Receiver Type
NA
72-channel, GNSS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1-SAIF, GLONASS L1OF, BeiDou B1I , Galileo E1B/C
Position Accuracy
NA
2.0 m CEP*
Acquisition
NA
Cold starts: 26s
Reacquisition: 2 s
Antenna
NA
External
Accuracy
NA
Velocity: 0.05m/s
Heading: 0.3 degrees
Altitude: not specified
Accelerometer
NA
±2/±4/±8/±16 g full scale
(max sampling rate-1KHz)
Gyroscope
NA
±125/±250/±500/±1000/±2000 dps full scale
(max sampling rate-1KHz)
PC Interfaces
Rugged Micro USB 2.0
(Datalogger mode and J2534)
Rugged Micro USB 2.0
(Datalogger mode and J2534
Data Storage Capability
8 or 16 GB Inbuilt eMMC storage
16 or 32 GB Inbuilt eMMC
storage
Supported Protocols
CAN Monitoring (RAW CAN signals, SAE J1939 support)
CAN Monitoring (RAW CAN signals, SAE J1939 support)
LEDs
2
2
Triggering
Trigger on CAN ID, CAN Signal, and Digital Input.
Trigger on DM1 counter.
Trigger on CAN ID, CAN Signal, and Digital Input.
Trigger on DM1 counte
Data Storage Format
Log files accessible via ReXdesk Software
Log files accessible via ReXdesk Software
File Format Supported
ASAM MDF (.mf4), Peak TRC, CSV, MATLAB, ASC, BLF
ASAM MDF (.mf4), Peak TRC, CSV, MATLAB, ASC, BLF
Data Logger Configuration
Supplied with Influx ReXdesk configuration software, XML based
Supplied with Influx ReXdesk configuration software, XML based
Analog Input
Analog Input
Number of channels
2 x Bipolar single-ended inputs
2 x Bipolar single-ended inputs
Range
± 10 V
± 10 V
Resolution (ADC)
12 Bit
12 Bit
Max sampling rate
1 kHz
1 kHz
Input Impedance
> 50 K Ohms
> 50 K Ohms
Safe Applied Voltage
± 28 V
± 28 V
Digital Input
Digital Input
Number of channels
2 x Unipolar single-ended inputs
2 x Unipolar single-ended inputs
Input Switching Thresholds
Low < 0.8 V, High > 2.5 V (up to 28V)
Low < 0.8 V, High > 2.5 V (up to 28V)
Safe Applied Voltage
± 28 V
± 28 V
Influx Technology assumes no liability for damages caused by normal wear, installation errors, or operating or maintenance faults. Applicable also when the user modifies the devices, any accessories, or the Software without the prior approval of Influx Technology.
The ReXgen2 is one of the most compact, pocket-sized data loggers suitable for automotive and various industrial applications. The device is designed to log data continuously for hours from a CAN bus and simultaneously save it to the embedded SD memory card. The device is tolerable in all harsh environments, requiring IP65 class protection. It can be easily mounted and integrated with your vehicle/machine.
This chapter overviews the device, its operating elements and functions, and its intended use.
Along with the free, user-friendly configuration software, the standalone ReXgen2 logger comes with the following advantages:
The extreme level of compactness – pocket size
Tolerable to harsh environments with an IP65 rating
Secure data storage with an internal eMMC
Supports CAN, CAN FD & LIN buses.
Functions as an interface device and supports J2534 (Pass-thru).
Supports live CAN trace monitoring, RAW CAN signals, and SAE J1939.
Sleep modes with wake up on CAN, wake on alarm & wake up on signal
Most advanced trigger & filter conditions
In-built gyroscope & accelerometer modules
2 x digital & 2 analog inputs
Up to 18 Hz rate GNSS module
Micro USB 2.0 PC interface
Internal temperature sensor
CAN error logging
The device meets the following standards and legal requirements:
This device complies with the directives, standards, and normative documents listed in the chapter 'Certifications'.
This device complies with the directives, standards, and normative documents listed in the chapter 'Certifications'.
This device complies with the directives, standards, and normative documents listed in the chapter 'Certifications'.
Packaging will contain the following components:
1x Rexgen2 with integrated cable
1x Micro USB
1x Rexgen2 with integrated cable
1x Micro USB
1x GNSS Antenna with 5M long cable
ReXgen2 device will be supplied with a freely distributed configuration and data retrieval software, ReXdesk.
* CEP - circular error probable
For detailed information on the respective tests, see Chapter .
The Software can be downloaded from our website, .
Function | Description |
---|
Model
eMMC Storage
CAN/CAN FD
Analog I/P
Accelerometer & Gyroscope
GNSS
INF2110.01
8 GB
2
2
No
No
INF2110.02
16 GB
2
2
No
No
INF2112.02
16 GB
2
2
Yes
Yes
INF2112.03
32 GB
2
2
Yes
Yes
BUS & Signals | Operating Voltage |
Power supply - OBD | +5V to+ 27V |
Power supply - USB | +4.5 to +5.5V |
CAN FD | +2 to +3V |
LIN | 0 to +24V |
Digital Input | 0 to +28V |
Analog input | ± 10V |
ReXgen 2 | ReXgen 2IMU |
Transceiver Protection(CAN) | Bus fault protection: ±58 V Thermal-shutdown protection (TSD) Common mode input voltage: ± 12V TXD dominant timeout (prevents network blocking in the event of a failure) Under-voltage protection | Bus fault protection: ±58 V Thermal-shutdown protection (TSD) Common mode input voltage: ± 12V TXD dominant timeout (prevents network blocking in the event of a failure) Under-voltage protection |
Transceiver Protection (LIN) | ±8 kV HBM ESD, ±2 kV CDM, ± bus Fault TXD dominant timeout (to prevent the LIN node from permanently driving the LIN Bus dominant) | ±8 kV HBM ESD, ±2 kV CDM, ± bus Fault TXD dominant timeout (to prevent the LIN node from permanently driving the LIN Bus dominant) |
Power Voltage | 5V for external sensor (current consumed should be less than 10mAmp) | 5V for external sensor (current consumed should be less than 10mAmp) |
Enclosure | PC+ ABS | PC+ ABS |
IP Rating | IP65 | IP65 |
Dimension | L - 100 mm, W - 73.5 mm, H – 27.4 mm | L - 100 mm, W - 73.5 mm, H – 27.4 mm |
Weight | 164 gms | 164 gms |
Mounting Holes | 4 mounting holes and screws | 4 mounting holes and screws |
Stackable | Yes | Yes |
Environmental Tolerance | Working temperature -40degC to +85degC; Humidity max 90% | Working temperature -40degC to +85degC; Humidity max 90% |
Silent Mode | Listen only mode available (configurable Silent mode) | Listen only mode available (configurable Silent mode) |
Power Saving | Wake Up On CAN, Wake up on Movement, Power Down Mode, Sleep Modes | Wake Up On CAN, Wake up on Movement, Power Down Mode, Sleep Modes |
Power Safe | 100% power safe data logging - no file corruption when disconnected or in sleep mode | 100% power safe data logging - no file corruption when disconnected or in sleep mode |
Protection | Reverse voltage protection on CAN-bus supply | Reverse voltage protection on CAN-bus supply |
Power Consumption | Normal Operation: <75 mA at 12 V Normal sleep <17mA Deep Sleep <2 mA | Normal Operation: <80 mA at 12 V Normal sleep <25mA Deep Sleep <2 mA |
Please visit the support section on our website .
The latest versions of the drivers, Software, and firmware are available .