# Set the Date and Time of the Rebel Data Logger.
After launching the Dialog Software, the user must connect the Rebel Data logger to the PC using a USB cable. To set the date and time of the logger, click on the 'Set Time' tab in the navigation bar.
The user must set the date and time according to the time that matches their time zone.
Once done, the user must click the 'OK' tab to confirm the settings.
[Click ](/support_guides/product-tutorial-videos/dialog/dialog-tutorial-videos/set-date-and-time-format-sd-card-and-re-flash-firmware-of-rebel-data-logger.md)to watch the tutorial video.
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.influxtechnology.com/support_guides/dialog-user-guide/quick-start-guide/set-the-date-and-time-of-the-rebel-data-logger..md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.