# Specifications

<table><thead><tr><th width="265"></th><th></th></tr></thead><tbody><tr><td><strong>Technical Data</strong></td><td><strong>Description</strong></td></tr><tr><td><strong>Power supply</strong></td><td>6 to 36V DC.</td></tr><tr><td><strong>Interfaces</strong></td><td>CAN Bus</td></tr><tr><td><strong>PC interfaces</strong></td><td>None</td></tr><tr><td><strong>Enclosure</strong></td><td><p>Dimension (L115xH46xW105)</p><p>Weight 450g/IP65/ABS</p></td></tr><tr><td><strong>Environmental</strong></td><td>-40°C to +85°C Humidity max 90%</td></tr><tr><td><strong>Output voltages</strong></td><td>5V and 24V (Max current drawn 80 mA combined)</td></tr><tr><td> </td><td><strong>Analog Inputs</strong></td></tr><tr><td><strong>Number of channels</strong></td><td>8 Bipolar differential inputs</td></tr><tr><td><strong>Accuracy</strong></td><td>±0.0015%</td></tr><tr><td><strong>Software switchable range</strong></td><td> ±80V, ±40V, ±20V, ±10V</td></tr><tr><td><strong>Resolution (ADC)</strong></td><td>16 Bit</td></tr><tr><td><strong>Max Sampling Rate</strong></td><td>(10 KHz) 2 channel, (5 KHz) 2 channel, (2 KHz) 4 channel, (1 KHz)  8 channel (Thermocouple and Digital Data will be turned off when rates above 1 ms are used for ADC channels.)</td></tr><tr><td><strong>Input impedance</strong></td><td>> 4 M Ohm</td></tr><tr><td><strong>Max input voltage</strong></td><td>±75 Analog Ground, ±50 V Analog inputs</td></tr><tr><td> </td><td><strong>Thermocouple Inputs</strong></td></tr><tr><td><strong>Number of channels</strong></td><td>8 J/K/T-type inputs</td></tr><tr><td><strong>Accuracy</strong></td><td>±1°C accuracy</td></tr><tr><td><strong>Measurement Range</strong></td><td>Measurement: -200 °C to 1250 °C</td></tr><tr><td><strong>Max Sampling Rate</strong></td><td>10 Hz (all 8 channels)</td></tr><tr><td><strong>Maximum input voltage</strong></td><td>±3.3 V</td></tr><tr><td> </td><td><strong>Digital Input / Output</strong></td></tr><tr><td><strong>Number of channels</strong></td><td>×4 unipolar single-ended hardware configured as inputs or outputs</td></tr><tr><td><strong>Input switching thresholds</strong></td><td>Low &#x3C; 1.5V</td></tr><tr><td></td><td>High > 2.0V (up to 12V)</td></tr><tr><td><strong>Input leakage current</strong></td><td> &#x3C; 10nA</td></tr><tr><td><strong>Output states</strong></td><td>(Optional) Open collector - 510 Ohm </td></tr><tr><td><strong>Output drive capability (OK): Collector-emitter voltage</strong></td><td> 45V max</td></tr><tr><td><strong>Collector current (DC)</strong></td><td>10mA max</td></tr><tr><td><strong>Saturation voltage (OK on)</strong></td><td>&#x3C; 0.15V</td></tr><tr><td><strong>Equivalent on-resistance</strong></td><td>&#x3C; 510Ohm</td></tr><tr><td><strong>Leakage current at OK off</strong></td><td>&#x3C; 5uA</td></tr><tr><td><strong>Min-max applied voltage</strong></td><td>Digital input -8V to +12V; Digital output 0V to +40V power supply, which limits the current to 10mA</td></tr><tr><td><strong>PWM</strong></td><td>3 digital input frequency measurements up to 100kHz or pulse measurements. (min 100 Nano sec) (between pulses 10 microseconds)</td></tr></tbody></table>