# Event Measurement
To count digital events, select Event Counter in the drop-down box:
Also, set the CAN ID where The K Box will transmit the result.
Set the Rate you wish to measure at:
Select the edge on which you wish to start measuring the events.
or according to whether the Modulation is on the rising or falling edge:
{% hint style="info" %}
**Notes:**
* The Event counter will be reset if the K-Box is power cycled or loaded with a new configuration.
{% endhint %}
The Event counter will be incremented on any received registered event edge.
or 
according to whether the Modulation is on the rising or falling edge:
{% hint style="info" %}
**Notes:**
* The Event counter will be reset if the K-Box is power cycled or loaded with a new configuration.
{% endhint %}
The Event counter will be incremented on any received registered event edge.