# Pulse Duration Measurement

To measure Pulse duration, select Pulse duration in the drop-down box:

<figure><img src="https://1039220062-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRhWtYvkHNZy7Jvdnc3wk%2Fuploads%2FrNiFmTI2lYfmK3lTqV7O%2Fimage.png?alt=media&#x26;token=42dd2d01-6d1e-4548-b55f-382badc968fd" alt=""><figcaption></figcaption></figure>

Also, set the CAN ID rate, where The K Box will transmit the result.

<figure><img src="https://1039220062-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRhWtYvkHNZy7Jvdnc3wk%2Fuploads%2FLrcX0xISn6D5PeXaovOR%2Fimage.png?alt=media&#x26;token=c04ff3a5-7bc1-471b-a982-ad4bf1acfb22" alt=""><figcaption></figcaption></figure>

Set the Rate you wish to measure at:

<figure><img src="https://1039220062-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRhWtYvkHNZy7Jvdnc3wk%2Fuploads%2FFqOXy9v9Twp9FDbltyGx%2Fimage.png?alt=media&#x26;token=749420c8-ac04-4e19-a507-16fc76efdb0b" alt=""><figcaption></figcaption></figure>

Select the edge on which you wish to start measuring the pulse duration.

<figure><img src="https://1039220062-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRhWtYvkHNZy7Jvdnc3wk%2Fuploads%2F33IS4tR7DCbzmHDOj2UV%2Fimage.png?alt=media&#x26;token=76a2984a-63cc-4a79-873f-03ba959e0eab" alt=""><figcaption></figcaption></figure>

The KBox will not send CAN messages (although the rate is met) until the required measurement is finished.

The KBox will re-calculate the message and Rate to prevent CAN bus overloading.

#### Examples:

**Pulse frequency:** 2000Hz (0.5ms). Rate: 50ms. CAN bus Speed: 125 kbps.

&#x20;              If there is no overloading of the CAN bus, a corresponding CAN Message will be sent every 50ms.

**Pulse frequency:** 2000Hz (0.5ms). Rate: 1ms. CAN bus Speed: 125 kbps.

&#x20;              If there is no overloading of the CAN bus, a corresponding CAN Message will be sent every 2ms.