# Rebel Data Logger Connector

<figure><img src="https://1222752003-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdOw3hdDe6gabAGiQZT7A%2Fuploads%2FJ8vBjJy7yq5GceO9ugWq%2FRebel%20Data%20Logger%20Connector.png?alt=media&#x26;token=9c5840ed-3e0d-448d-bbfb-ac331b3abf3f" alt=""><figcaption><p>Female 25-pin standard D-Type connector</p></figcaption></figure>

<table data-header-hidden><thead><tr><th width="129"></th><th></th></tr></thead><tbody><tr><td><strong>Pin No</strong></td><td><strong>Pin Function</strong></td></tr><tr><td>Pin 1</td><td>Analog Input 3 - do not apply voltages outside of the -10 to +10V range</td></tr><tr><td>Pin 2</td><td>LIN 1</td></tr><tr><td>Pin 3</td><td>CAN/CAN FD 3 L</td></tr><tr><td>Pin 4</td><td>Analog Input 1 - do not apply voltages outside of the -10 to +10V range</td></tr><tr><td>Pin 5</td><td>Wake-Up pin to wake logger from sleep mode (for use see Appendix 1)</td></tr><tr><td>Pin 6</td><td>CAN Bus 1 (Medium Speed Bus) Low Signal</td></tr><tr><td>Pin 7</td><td>CAN Bus 0 (High Speed Bus) Low Signal</td></tr><tr><td>Pin 8</td><td>K-Line (1 wire bus) of ISO 9141</td></tr><tr><td>Pin 9</td><td>4.5-36V Supply Voltage</td></tr><tr><td>Pin 10</td><td>+4.5V Instrumentation Supply Voltage, ensure that current draw is not more than 100mA</td></tr><tr><td>Pin 11</td><td><p>Digital Input or Output 2 - When used as an input do not apply voltages outside of the 0 to +12V range, when used as an Output ensure that current draw is not more than 100mA. </p><p>More information on use ofthis pin can be found in Appendix 2 and 3</p></td></tr><tr><td>Pin 12</td><td><p>Digital Input or Output 0 - When used as an input do not apply voltages outside of the 0 to +12V range, when used as an Output ensure that current draw is not more than 100mA. </p><p>More information on use ofthis pin can be found in Appendix 2 and 3</p></td></tr><tr><td>Pin 13</td><td>CAN/CAN FD Bus 2 (Instrumentation Bus) Low Signal</td></tr><tr><td>Pin 14</td><td>Analog Input 2 - do not apply voltages outside of the -10 to +10V range</td></tr><tr><td>Pin 15</td><td>LIN 0</td></tr><tr><td>Pin 16</td><td>CAN/CAN FD 3 H</td></tr><tr><td>Pin 17</td><td>Analog Input 0 - do not apply voltages outside of the -10 to +10V range</td></tr><tr><td>Pin 18</td><td>Analog Ground</td></tr><tr><td>Pin 19</td><td>CAN Bus 1 (Medium Speed Bus) High Signal</td></tr><tr><td>Pin 20</td><td>CAN Bus 0 (High Speed Bus) High Signal</td></tr><tr><td>Pin 21</td><td>Ground</td></tr><tr><td>Pin 22</td><td>Power Ground</td></tr><tr><td>Pin 23</td><td>Digital Input or Output 3 (can also be used as a switched power supply +Vd)</td></tr><tr><td>Pin 24</td><td><p>Digital Input or Output 1 - When used as an input do not apply voltages outside of the 0 to +12V range, when used as an Output ensure that current draw is not more than 100mA. </p><p>More information on use ofthis pin can be found in Appendix 2 and 3</p></td></tr><tr><td>Pin 25</td><td>CAN/CAN FD Bus 2 (Instrumentation Bus) High Signal</td></tr></tbody></table>

{% hint style="warning" %}

#### WARNING

DO NOT SHORT CIRCUIT OR OVERLOAD ANY DIGITAL I/O e.g. IF USING DIGITAL INPUT OR OUTPUT 3 TO SUPPLY POWER TO A K-BOX OR A REBEL DASH, DO NOT CONNECT MORE THAN 1 K-BOX TO THIS OUTPUT AND BE CAREFUL THAT NO SHORT-CIRCUIT OCCURS.
{% endhint %}

{% hint style="warning" %}

#### WARNING

DO NOT SHORT CIRCUIT OR OVERLOAD PIN10 (+4.5V INSTRUMENTATION)
{% endhint %}