# ReXgen 1

<figure><img src="/files/qd8e7YTxYR45AchveKqM" alt=""><figcaption></figcaption></figure>

{% file src="/files/FHZEOmUCN0hEkMcOAKDH" %}

### ReXgen 1 with 9-pin Standard D-Type connector

<table data-header-hidden><thead><tr><th width="171"></th><th></th></tr></thead><tbody><tr><td><strong>Pin No</strong></td><td><strong>Pin Function</strong></td></tr><tr><td><strong>Pin 1</strong></td><td>NC</td></tr><tr><td><strong>Pin 2</strong></td><td>CAN-Low</td></tr><tr><td><strong>Pin 3</strong></td><td>GND</td></tr><tr><td><strong>Pin 4</strong></td><td>Nc</td></tr><tr><td><strong>Pin 5</strong></td><td>Power GND</td></tr><tr><td><strong>Pin 6</strong></td><td>NC</td></tr><tr><td><strong>Pin 7</strong></td><td>CAN-High</td></tr><tr><td><strong>Pin 9</strong></td><td>Power Supply 5V to 27V</td></tr></tbody></table>

### ReXgen 1 with Deutsch style 8-pin connector

<figure><img src="/files/53HEG7eRRKtJWgG8ni2q" alt="" width="188"><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="168.4444580078125" valign="bottom"></th><th valign="bottom"></th></tr></thead><tbody><tr><td valign="bottom"><strong>Pin No</strong></td><td valign="bottom"> <strong>Pin Functions</strong></td></tr><tr><td valign="bottom"><strong>Pin 1</strong></td><td valign="bottom">Digital In 1</td></tr><tr><td valign="bottom"><strong>Pin 2</strong></td><td valign="bottom">CAN L</td></tr><tr><td valign="bottom"><strong>Pin 3</strong></td><td valign="bottom">GND</td></tr><tr><td valign="bottom"><strong>Pin 4</strong></td><td valign="bottom">LIN</td></tr><tr><td valign="bottom"><strong>Pin 5</strong></td><td valign="bottom">Power GND</td></tr><tr><td valign="bottom"><strong>Pin</strong> </td><td valign="bottom">Digital In 0</td></tr><tr><td valign="bottom"><strong>Pin 7</strong></td><td valign="bottom">CAN H</td></tr><tr><td valign="bottom"><strong>Pin 8</strong></td><td valign="bottom">5-31V</td></tr></tbody></table>

{% hint style="info" %}

#### Notes:

* The connector needs to be tightened properly to make a proper connection, ensuring reliable operation.&#x20;
* Each end of the CAN bus must be terminated with a 120 Ohm resistor across CAN H & CAN L.&#x20;
* Do not short-circuit any pins.&#x20;
* The maximum safe applied voltage for analog and digital I/P is ± 28 V.
  {% endhint %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.influxtechnology.com/support_guides/pinouts-influx-product-range/cables-and-product-pinouts/rexgen-series/rexgen-1.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.