⌘Ctrlk

Influx- Support Documentation
FAQs

🏠Home
🎬Product Tutorial Videos
- ReXdesk: Tutorial Videos
  Set up REXGEN as a Passthru device (a demo using module analyser)
  Install REXGEN drivers
  Setting up REXGEN Series
  Setup REXGEN series to record CAN data.
  Retrieve Raw data from a REXGEN Series
  Enable triggers to startand stop logging, using ReXdesk
  Retrive data using DBC file
  Set up CAN Message filtering in a REXGEN Series using DBC file
  Set up REXGEN Series to log data using J1939 filter
  Set up REXGEN Series to log CAN Error
  Configure analog and digital channels using ReXdesk
  Set up IMU using ReXdesk
  Set up GNSS and it's advanced options using ReXdesk.
  Set up Advanced Export options for multiple files in the ReXdesk software
  Set up Sleep mode in a REXGEN data logger
  Set up Periodic Message Transmission in REXGEN
  Set up FTP settings in REXGEN
  Set up AWS settings in REXGEN
  Switch on the REXGEN RTC battery
  Configure REXGEN to record LIN data
  Import .rxd files in Rexdesk and convert them - with or without DBC. Import .rxd files in Rexdesk
  Update the firmware of a REXGEN series
  Update the configuration to the ReXgen Air via Cloud
  Activate the ReXdesk license
- K-TC: Tutorial Videos
- K-Box: Tutorial Videos
- Module Analyser: Tutorial Videos
- Rebel Dash: Tutorial Videos
- DiaLog: Tutorial Videos
- StreamLog: Tutorial Videos

Powered by GitBook

For the complete documentation index, see llms.txt. This page is also available as Markdown.

ReXdesk
ReXdesk: Tutorial Videos

Setting up REXGEN Series

PreviousInstall REXGEN drivers NextSetup REXGEN series to record CAN data.

Last updated 10 months ago