# Steps to enable AWS configuration in the ReXgen logger

* Prepare the base configuration for the logger.
* In the Device Configuration window, Click on the ‘Upload’ tab.
* Enable the ‘checkbox’ for ‘Enable Aws’.

  * For a single setting, details are auto-filled in the subsequent sections.
  * Users can select the desired setting from the corresponding drop-down menus for multiple settings.

  <figure><img src="https://109727927-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUEja6FQFpk6wbBteOsbv%2Fuploads%2Fg9KdDuKhw7hnKgaof83m%2Fimage.png?alt=media&#x26;token=43515c2a-0de2-455d-86d8-a57bc4e93aec" alt=""><figcaption></figcaption></figure>
* Click on the ‘Run’ tab in the Navigation bar.

<div align="left"><figure><img src="https://109727927-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUEja6FQFpk6wbBteOsbv%2Fuploads%2Fmwz7TFr4xv1x5CnthIzr%2Fimage.png?alt=media&#x26;token=01561b70-397a-4b19-bf24-95fdb968339f" alt=""><figcaption></figcaption></figure></div>

* Save the project:

![](https://109727927-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUEja6FQFpk6wbBteOsbv%2Fuploads%2FXd8wH1wZOCgdHlVLwAA5%2Fimage.png?alt=media\&token=79643e5a-89d9-4841-b1e0-72e74a1ac4b4)

**a) Save project:** allows you to save the project with the user-defined name.

<figure><img src="https://109727927-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUEja6FQFpk6wbBteOsbv%2Fuploads%2FPtDGF4ZCjoLUrmFwIItn%2Fimage.png?alt=media&#x26;token=71d7e757-3762-4a3a-9ad4-a5177f4a3cf5" alt=""><figcaption></figcaption></figure>

**b) Continue as “New Project”:** saves the configuration labelled ‘New Project.’

* Click 'OK' once the configuration is uploaded successfully.

![](https://109727927-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUEja6FQFpk6wbBteOsbv%2Fuploads%2FEp7nlNuO47N7tyardXpE%2Fimage.png?alt=media\&token=fa2b69f4-2481-4f92-bb7c-65830e5a469a)