# Steps to add new FTP settings using ReXdesk

{% hint style="info" %}
**Note:**

* Available only for ReXgen Air Devices.
  {% endhint %}

* Click on the Tool tab in the Navigation bar and select Cloud Settings.

![](/files/cVTPPiITqNZ69MDltLBv)

* Select the ‘FTP ‘option in the Cloud Settings window and then the ‘New FTP’ option.

<div align="left"><figure><img src="/files/WKce6G2cUQ3YIzErd4sj" alt=""><figcaption></figcaption></figure></div>

* To use the server, enable ‘Use Server Name’ and specify the Server name and port number.

#### Or

To use the IP address, enable ‘Use IP Address’ and specify the Server IP and port number.

<figure><img src="/files/2Wr8NXGHV0N1SNXgdWSr" alt=""><figcaption></figcaption></figure>

* Specify a label/name for the current FTP settings

<figure><img src="/files/qp4h4vULSMgGdNNCarBr" alt=""><figcaption></figcaption></figure>

* Specify Server Name/Server IP and Port.&#x20;

<figure><img src="/files/Vlu521ssqcYYqftv4XL6" alt=""><figcaption></figcaption></figure>

* Select the desired protocol from the ‘Protocol’ drop-down menu (select FTP for ReXgen devices).

<figure><img src="/files/PbRvdTU8nV85y5qGTF64" alt=""><figcaption></figcaption></figure>

* Select the desired mode from the ‘Mode’ drop-down menu (select Passive for ReXgen devices).

<figure><img src="/files/mC78FZOUBemON01pXwoW" alt=""><figcaption></figcaption></figure>

* Specify the User name and Password, and click ‘OK’.

<figure><img src="/files/wc1xlyKhXkSq26eGrmMq" alt=""><figcaption></figcaption></figure>

The new mobile setting details have been defined using ReXdesk.

<div align="left"><figure><img src="/files/jdFV2ScSDPiCntTJQYq1" alt=""><figcaption></figcaption></figure></div>

* The new mobile setting details have been defined using ReXdesk. Use ‘Edit FTP’ to change the existing FTP settings and ‘Delete FTP’ to delete any pre-existing FTP settings.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.influxtechnology.com/support_guides/rexdesk-configuration-software-s/rexdesk-rexgen-series-configuration-software/rexdesk-manual/quick-start-guide/advanced-configuration/setup-cloud-settings/ftp-settings/steps-to-add-new-ftp-settings-using-rexdesk.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.