# CAN Log All Configuration
* Create a new project.
* Drag and drop the ‘Log All’ tool into the bus from which the user wants to log data.
*\*User can do the same for up to 4 CAN buses.*
*\*User can add the CAN Error tool to the bus to log CAN errors.*
*See Appendix 1 for various error codes.*
* Click on the CAN Bus icons and set the CAN Bus properties.
*\*Users can use the ‘Use Bit Timing’ option for advanced configurations.*
* Click the Storage icon and configure the Log file settings.
* Connect the logger to the PC via USB.
The Status Bar will display the logger status and time information.
* Click ‘Run Configuration’, save the project, and provide a name for it. The logger will create files with the project name.
The configuration will be loaded in the data logger, and logging will start immediately.
[Video Tutorial](https://youtu.be/rkKgPTPYI5s?si=1jf-Wyx51TYuxZso)
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.influxtechnology.com/support_guides/rexdesk-configuration-software-s/rexdesk-rexgen-series-configuration-software/rexdesk-manual/quick-start-guide/preparation-of-configuration/can-log-all-configuration.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.