# Configuration Panel

<figure><img src="/files/I3eVulp5OXzOnQfOUOVp" alt=""><figcaption></figcaption></figure>

### Bus Options

This option is used to configure the CAN bus and LIN bus settings, such as:

![](/files/KOEWF4QAEVjUJo55MWZk)![](/files/gKwsTtlyQIV7QLz3gIWG)

* CAN/CAN FD bus speed
* LIN Bus settings
* Silent mode settings
* Bit timings

### Tool Bar

The toolbar holds the various functions that can be added to the CAN Bus.

<table data-header-hidden><thead><tr><th width="147.33333333333331"></th><th width="271"></th><th></th></tr></thead><tbody><tr><td><strong>CAN</strong></td><td><strong>CAN Icons</strong></td><td><strong>Description</strong></td></tr><tr><td><p>Log All</p><p> </p></td><td><img src="/files/pEMl52E4DgKCOILrmhWj" alt=""></td><td>The log All function will enable logging all the CAN/CAN FD messages on the CAN/CAN FD bus.</td></tr><tr><td><p>CAN Errors</p><p> </p></td><td><img src="/files/TDLJ0TLg7UMxQ0CiqQJj" alt=""></td><td>CAN Errors function enables logging of CAN bus errors in the data file. See Appendix 1 for various error codes</td></tr><tr><td>Filter</td><td><img src="/files/Fj1QudOmuXlgxpyBtCQO" alt=""></td><td>The filter function enables you to configure CAN/CAN FD logging by defining CAN/CAN FD ID pass filters.</td></tr><tr><td><p>J1939 Filter</p><p> </p></td><td><img src="/files/Al4y5QWK90LjY2Iv25Oq" alt=""></td><td><p>Allows the user to configure J1939 filtering for the source address, destination address, and PGN filtering.</p><p> </p></td></tr><tr><td>UDS</td><td><img src="/files/uXkqX3FfYr9VPTieM7bc" alt=""></td><td>Allows the user to configure UDS settings</td></tr><tr><td><strong>LIN</strong></td><td><strong>LIN Tool Bar Icons</strong></td><td><strong>Description</strong></td></tr><tr><td><p>Log All</p><p> </p></td><td><img src="/files/rqfw0yoKgDREioAskrwy" alt=""></td><td>The log All function will enable logging all the LIN messages on the LINbus.</td></tr><tr><td>Schedule</td><td><img src="/files/nzkkd4Jel2f6R7XYsUB7" alt=""></td><td>Allows the user to use the ReXgen device in master mode by loading the schedule table from the LDF file.</td></tr><tr><td><strong>CHANNELS</strong></td><td><strong>Channels Icons</strong></td><td><strong>Description</strong></td></tr><tr><td><p>Analog</p><p> </p></td><td><img src="/files/QuO1JDzFsvVXqTQGNPGs" alt=""></td><td>Allows the user to add an analogue channel and set the sampling rate and conversion formula.</td></tr><tr><td><p>Dig in</p><p> </p></td><td><img src="/files/SVKyVWO8WAdjGOVAtLRU" alt=""></td><td><p>Allows the user to add digital channels and set the sampling rate.</p><p> </p></td></tr><tr><td><p>IMU &#x26; GNSS</p><p> </p></td><td><img src="/files/ZUFPMFQPihoXqZ4RBQra" alt=""></td><td>Allows the user to configure IMU channels and GNSS channels.</td></tr><tr><td><strong>Transmitting Options</strong></td><td><strong>Transmitting Options Icons</strong></td><td><strong>Description</strong></td></tr><tr><td>Periodic</td><td><img src="/files/gLtMLPvt2zjnfVZ0w2Er" alt="" data-size="original"></td><td>Allows the user to configure Periodic Transmission of CAN/CAN FD messages from ReXgen.</td></tr><tr><td>HW Info</td><td><img src="/files/Oxx08tbaYsVELk1390E7" alt="" data-size="original"></td><td>Allows the user to configure the transmission of Hardware Diagnostics information.</td></tr><tr><td>Snapshot</td><td><img src="/files/kjOELaN1PGVLGuTqBZQs" alt="" data-size="original"></td><td>Allows the user to transmit a periodic sample of decoded CAN bus data for select CAN messages of interest in the Jason format.</td></tr></tbody></table>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.influxtechnology.com/support_guides/rexdesk-configuration-software-s/rexdesk-rexgen-series-configuration-software/rexdesk-manual/software-introduction/configuration-panel.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.