# CAN Bus Options
### CAN Settings
**Type–** Allows the user to choose between CAN or CAN FD bus.
**Autodetect bus speed–** Enables auto-detection of CAN bus speed.
**CAN Speed–** This allows the user to select CAN bus speed. 125Kbps – 1000 Kbps.
**Silent Mode–** Enables the silent mode.
### CAN FD Settings
**Type–** Allows the user to choose between CAN or CAN FD bus.
**Autodetect bus speed–** Enables auto-detection of CAN bus speed.
**CAN Speed (Arbitration Phase)–** This allows the user to select CAN bus speed. 125 – 1000 Kbps.
**CAN FD Speed (Data Phase)–** This allows the user to select CAN FD speed 1 Mbit – 8 Mbit.
**Silent Mode–** Enables the silent mode.
**CAN FD Non-ISO–** This allows the user to enable Non-ISO CAN FD mode
How to configure the ReXgen data logger to [record CAN](https://youtu.be/rkKgPTPYI5s?si=1jf-Wyx51TYuxZso) data.
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.influxtechnology.com/support_guides/rexdesk-configuration-software-s/rexdesk-rexgen-series-configuration-software/rexdesk-manual/software-introduction/configuration-panel/can-bus-options.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.