# LIN Bus Options
### LIN Settings
**Protocol Version–** This allows the user to choose the protocol version.
**Baudrate (bit/s)–** This allows the user to define the baud rate for the LIN bus.
**Time Base (ms)–** This allows the user to schedule LIN frame slots based on a LIN cluster time unit called the LIN time base, usually 5 or 10 mS.
**Time Jitter (ms)–** This allows the user to delay the tolerance specified for the Master node, which will be available in the LDF file.
**Master Mode–** This allows the user to activate the master mode, which becomes active when the user loads a schedule table.
How to configure ReXgen data logger to [record LIN](broken://spaces/YNtwPTZTUk65EtDvDNhd/pages/p1u3RymlYcEcB8rmQ0RO) data.
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.influxtechnology.com/support_guides/rexdesk-configuration-software-s/rexdesk-rexgen-series-configuration-software/rexdesk-manual/software-introduction/configuration-panel/lin-bus-options.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.