# Uploading new configuration to device via AWS

{% hint style="info" %}

#### **Notes:**

* Before you begin the steps, ensure your logger is connected to the server with an existing configuration.
  {% endhint %}

* Make the new configuration.

* Enable AWS from the Device Configuration menu.

{% hint style="info" %}

#### Notes:

* Set your configuration check time in the given section while enabling AWS.
  {% endhint %}

<figure><img src="https://1612018018-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTCRfbN5hBLeUzIaKHbJ7%2Fuploads%2FujUYvKqDpvMLRKvuxPGI%2Fawws.png?alt=media&#x26;token=40c04f63-7f2c-4079-bdce-d5568e1b555b" alt=""><figcaption></figcaption></figure>

* Save the Project with the name you require for the configuration.
* Under the ‘Config’ tab, select Export from the drop-down menu.
* Select ‘Export ReXgen Configuration (rxc)’ from the listed options.

<div align="left"><figure><img src="https://1612018018-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTCRfbN5hBLeUzIaKHbJ7%2Fuploads%2FH4XG1TxtMgv59hEPa5XY%2Fimage.png?alt=media&#x26;token=1f8ef04f-c56b-489c-8b85-047546ed2d26" alt="" width="454"><figcaption></figcaption></figure></div>

* Save the file with the desired name.
* Click ‘Save’.
* Once saved, rename the file as ‘config.rxc.’

{% hint style="info" %}

#### Notes:

* Ensure that you rename the file as 'config.rxc' only.
  {% endhint %}

<figure><img src="https://1612018018-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTCRfbN5hBLeUzIaKHbJ7%2Fuploads%2F5HFCakjYYvPaezsJC5P7%2Fimage.png?alt=media&#x26;token=2f18a28e-c02a-44c6-9e3d-8b7db2c1c941" alt=""><figcaption></figcaption></figure>

* Add to your configuration folder in your S3 bucket by adding it to the root folder of the logger.

<figure><img src="https://1612018018-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTCRfbN5hBLeUzIaKHbJ7%2Fuploads%2F4Gjllwxr4vkyvqs9lGq3%2Fimage.png?alt=media&#x26;token=0ff5745e-370c-4775-ad05-d819993e9909" alt=""><figcaption></figcaption></figure>

{% hint style="info" %}

#### Notes:

* Once the USB is removed, only then the logger will connect to the server and upload files.
  {% endhint %}