> For the complete documentation index, see [llms.txt](https://docs.influxtechnology.com/support_guides/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.influxtechnology.com/support_guides/rexgen-series-product-manuals/rexgen-oem-product-manual/rexgen-oem-product-manual/general-information/technical-specification.md).

# Technical Specification

<table data-full-width="false"><thead><tr><th width="279.75">Functions</th><th width="657">ReXgen OEM</th></tr></thead><tbody><tr><td>CAN Interfaces</td><td><p>Up to 4 x CAN/CAN FD (Arbitration Rate up to 1000 Kbps &#x26; Data Rate 8 Mbps) </p><p>ISO 11898-1: Compliant with CAN (up to 1 Mbit/s)</p><p>ISO &#x26; Bosch CAN FD (up to 8 Mbit/s) </p><p>Conforms to CAN protocol version 2.0 - part A, B </p><p>Max 20000 mps </p><p>Meets the requirements of ISO 11898-2:2016 &#x26; ISO 11898-5:2007 physical layer standards</p></td></tr><tr><td>CAN/CAN FD Functions</td><td><p>Supports custom baud rates </p><p>CAN/CAN FD Bit timing selection </p><p>SAE J1939 support (Source Address, Destination Address &#x26; PGN Filters) </p><p>Silent Mode Configurable </p><p>CAN DBC Support </p><p>CAN frame error detection</p></td></tr><tr><td>LIN Interface</td><td>1 x LIN (Master &#x26; Slave mode) (optional)</td></tr><tr><td>RAM</td><td>2GB</td></tr><tr><td>Storage</td><td>8GB ©</td></tr><tr><td>Processor</td><td>NXP imx8mini Application Series Quad core processor</td></tr><tr><td>OS/Configuration </td><td>Yocto based Linux </td></tr><tr><td>Secure Element</td><td>On Request</td></tr><tr><td>Socket CAN</td><td>Supported</td></tr><tr><td>Bluetooth</td><td>Murata 1MW Bluetooth® 5.0 BR/EDR/LE module</td></tr><tr><td>WiFi</td><td>Murata 1MW WiFi module</td></tr><tr><td>Wifi Antenna</td><td>External FAKRA Code E</td></tr><tr><td>LTE</td><td>CAT 1 (mention the chip)  or CAT 4  or NB-IoT</td></tr><tr><td>Data Transfer Protocol</td><td>Any </td></tr><tr><td>Inputs</td><td>2x Digital and 3x Analog</td></tr><tr><td><strong>Positioning &#x26; IMU Sensors</strong></td><td></td></tr><tr><td>IMU</td><td>6 Axis ( Max sampling rate 1KHz)</td></tr><tr><td>GNSS</td><td>Neo M8 Series or Neo M9 Series (18Hz)</td></tr><tr><td>GNSS Receiver Type</td><td>72-channel, GNSS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1-SAIF, GLONASS L1OF, BeiDou B1I, Galileo E1B/C</td></tr><tr><td>Position Accuracy</td><td>2.0 m CEP*</td></tr><tr><td>Acquisition</td><td><p>Cold starts: 26s </p><p>Reacquisition: 2 s</p></td></tr><tr><td>Antenna</td><td>External FAKRA Code C</td></tr><tr><td>Accuracy</td><td><p>Velocity: 0.05m/s </p><p>Heading: 0.3 degrees </p><p>Altitude: not specified</p></td></tr><tr><td>Accelerometer </td><td>±2/±4/±8/±16 g full scale(max sampling rate-1KHz)</td></tr><tr><td>Gyroscope</td><td>±125/±250/±500/±1000/±2000 dps full scale (max sampling rate-1KHz)</td></tr><tr><td>PC Interfaces</td><td>Rugged Micro USB 2.0 (Datalogger mode and J2534)</td></tr><tr><td>Data Storage Capability</td><td>Logger (variable 4*) and LINUX (8GB)</td></tr><tr><td>Supported Protocols</td><td>CAN Monitoring (RAW CAN signals, SAE J1939 support)</td></tr><tr><td>LEDs</td><td>2</td></tr><tr><td>Triggering</td><td><p>Trigger on CAN ID, CAN Signal, and Digital Input. </p><p>Trigger on DM1 counter.</p></td></tr><tr><td>Data Storage Format</td><td>Log files accessible via ReXdesk Software</td></tr><tr><td>File Format Supported</td><td>ASAM MDF (.mf4), Peak TRC, CSV, MATLAB, ASC, BLF</td></tr><tr><td>Data Logger Configuration</td><td>Supplied with Influx ReXdesk configuration software, XML based Configuration</td></tr><tr><td> <strong>Analog Input</strong></td><td></td></tr><tr><td>Number of channels</td><td>2 x Bipolar single-ended inputs (1x connected to Power supply)</td></tr><tr><td>Range</td><td>± 10V</td></tr><tr><td>Resolution (ADC)</td><td>12 Bit</td></tr><tr><td>Max sampling rate</td><td>1 kHz</td></tr><tr><td>Input Impedance</td><td>> 50 K Ohms</td></tr><tr><td>Safe Applied Voltage</td><td>± 28 V</td></tr><tr><td> <strong>Digital Input</strong></td><td></td></tr><tr><td>Number of channels</td><td>2 x Unipolar single-ended inputs</td></tr><tr><td>Input Switching Thresholds</td><td>Low &#x3C; 0.8 V, High > 2.5 V (up to 28V)</td></tr><tr><td>Safe Applied Voltage</td><td>±28 V</td></tr><tr><td>Transceiver Protection</td><td><p>Bus fault protection: ±58 V </p><p>Thermal-shutdown protection (TSD)</p><p>Under-voltage protection</p></td></tr><tr><td>Enclosure</td><td>PC+ ABS</td></tr><tr><td>IP Rating</td><td>Build to order</td></tr><tr><td>Dimension</td><td>L - 100 mm, W - 73.5 mm, H – 27.4 mm</td></tr><tr><td>Weight</td><td>240 gms</td></tr><tr><td>Mounting Holes</td><td>4 mounting holes and screws</td></tr><tr><td>Stackable</td><td>Yes</td></tr><tr><td>Environmental Tolerance</td><td>Working temperature -40degC to +85degC; Humidity max 90%</td></tr><tr><td>Power Saving</td><td>Wake Up On CAN, Wake up on Momnet, Digital Input, Power Down Mode, Sleep Modes</td></tr><tr><td>Power Consumption</td><td><p>Normal Operation: 250 mA to 300 mA at 12 V </p><p>Power Down Mode: 4.8 mA at 12 V</p></td></tr></tbody></table>

## LTE Modem Data

<table data-header-hidden><thead><tr><th width="282.75"></th><th></th></tr></thead><tbody><tr><td> Integrated GPRS </td><td>LTE modem</td></tr><tr><td>Category</td><td>LTE CAT 1 or 4 or NB-IoT</td></tr><tr><td>SIM</td><td>Nano/E-SIM</td></tr><tr><td>LTE CAT1 Bands</td><td>LTE FDD Bands: 1(2100 MHz) ,2(1500 MHz), 3(1800 MHz),4(1700 MHz), 7(2600 MHz), 8(900 MHz), 12(700 MHz), 13(700 MHz), 19(850 MHz), 20(800 MHz), 28(700 MHz)</td></tr><tr><td>Receiver input Sensitivity</td><td>-98dBm to -114dBm: 700MHz to 2100MHz</td></tr><tr><td>Antenna</td><td>External FAKRA Code D</td></tr></tbody></table>

## ELECTRICAL DATA

<table><thead><tr><th width="279.75">BUS &#x26; Signals</th><th width="657">Operating Voltage</th></tr></thead><tbody><tr><td>Power supply - OBD</td><td>5V to 27V</td></tr><tr><td>Power supply - USB</td><td>+4.5 to +5.5V</td></tr><tr><td>CAN FD</td><td>+2 to +3V</td></tr><tr><td>LIN</td><td>0 to +24V</td></tr><tr><td>Digital Input</td><td>0 to +28V</td></tr><tr><td>Analog input</td><td>± 10V</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://docs.influxtechnology.com/support_guides/rexgen-series-product-manuals/rexgen-oem-product-manual/rexgen-oem-product-manual/general-information/technical-specification.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.