⌘Ctrlk

Influx- Support Documentation
FAQs

🏠Home
ReXgen Series
Standard Operating Procedure - ReXgen
Pinout Details: ReXgen 1
Pinout Details: ReXgen 2/IMU
Pinout Details: ReXgen Air
Pinout Details: ReXgen Pro
Pinout Details: ReXgen OEM
- Start-up Guide: ReXgen 1
- ReXgen 1- Product Manual
- Start-up Guide: ReXgen 2/IMU
- ReXgen 2/IMU- Product Manual
- Start-up Guide: ReXgen Air
- ReXgen AIR- Product Manual
- Start-up Guide: ReXgen Pro
- ReXgen Pro- Product Manual
- ReXgen OEM - Product Manual
  General Information
  "How to" with ReXgen OEM
  Powering ReXgen OEM On Bench
  Connecting the ReXgen OEM to Vehicle
  Loading Linux Image onto ReXgen OEM
  ReXgen OEM FTDI Connection for SSH access (or terminal access)
  Interfacing to Linux Platform via Serial Port
  Connecting to the terminal via the serial port
  Configuring the WLAN settings
  Connecting to the terminal using Putty SSH Client
  Connecting to the Device via SFTP
  Starting PPP Connection
  Install and configure the Tailscale VPN service
  Interacting with ReXgen (MIP)
  Preparing OBD Logging configuration
  Changing the configuration of ReXgen
- Cloud Usage Guides For ReXgen Air Device

Powered by GitBook

For the complete documentation index, see llms.txt. This page is also available as Markdown.

ReXgen OEM Product Manual
ReXgen OEM - Product Manual
"How to" with ReXgen OEM

Connecting the ReXgen OEM to Vehicle

Find the OBDII port on the vehicle and attach the OBDII side of the supplied cable to it

Connect the DSub9 to the 2Way/5Way Multiconnect

PreviousPowering ReXgen OEM On Bench NextLoading Linux Image onto ReXgen OEM

Last updated 7 months ago