# Loading Linux Image onto ReXgen OEM

* Download the image from the link below

​[https://itltdgithub.s3.ap-south-1.amazonaws.com/Images/uuu-deploy-general-v2-08052025.7z ](https://itltdgithub.s3.ap-south-1.amazonaws.com/Images/uuu-deploy-general-v2-08052025.7z)​

* Extract it into your PC.

<figure><img src="https://1612018018-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTCRfbN5hBLeUzIaKHbJ7%2Fuploads%2FHfqo5bbdAchqs78Lxblg%2Fimage.png?alt=media&#x26;token=673bc761-d0a8-48d4-8b17-0e01c4597021" alt=""><figcaption></figcaption></figure>

* Open the command prompt in this location.
* Then run the following command

<p align="center"><em>uuu deploy-image-wic.uuu</em></p>

<figure><img src="https://1612018018-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTCRfbN5hBLeUzIaKHbJ7%2Fuploads%2FMCdcI0CW42Ajftid4BIR%2Fimage.png?alt=media&#x26;token=6d6dc752-fd10-490c-84a0-15e1cf275edd" alt=""><figcaption></figcaption></figure>

* Make sure that the device is off first.
* Remove the cover.
* Now, connect the 5-pin USB header to the mini ISP connector.

<figure><img src="https://1612018018-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTCRfbN5hBLeUzIaKHbJ7%2Fuploads%2FbtMWpXjpZhKngv20v2Bv%2Fimage.png?alt=media&#x26;token=1df86785-2d38-4beb-8736-3d77253711e5" alt=""><figcaption></figcaption></figure>

* The Red pin of the header should align with the dot. (Colour of cables might change depending on surce of purchase).
* Now connect the other end to the PC.
* Then, turn on the device.
* The flashing should start now, and you should see progress in the CMD window opened earlier.
* Once flashing is completed.
* Switch off the device and remove the USB cable from the board.
* Restart and configure the WiFi using Hotspot