LogoLogo
Home
  • 🏠Home
  • 💽ReXdesk: Configuration Software
  • ReXdesk : ReXgen Series Configuration Software
    • ReXdesk Manual
      • Getting Started
        • Pinout Details: ReXgen1
        • Pinout Details: ReXgen 2
        • Pinout details: ReXgen Air
        • Pinout Details: ReXgen Pro
        • Software Installation
        • Driver Installation
        • Activate ReXdesk License
      • Software Introduction
        • Graphical Overview
        • Navigation Bar
          • File Menu
          • Project Menu
          • Config Menu
          • Device Menu
          • Tool Menu
            • Encryption Manager
            • Cloud Settings
              • Mobile Settings
              • Wi-Fi Settings
              • *FTP Settings
              • AWS Settings
            • Settings
        • Status Bar
        • Projects Panel
        • Configuration Panel
          • CAN Bus Options
          • LIN Bus Options
          • Channel Options
          • Transmitting
            • Periodic CAN/CAN FD Transmission
            • HW Info Tool
            • Snapshot Tool
          • Filter
          • Device Configuration
            • Storage
            • Encrypting Data Log and Device
            • Enabling FTP Upload
            • ReXgen Sleep/Wake up function Implementation
            • AWS
            • Live data window
        • Library window
        • Trigger window
          • New trigger panel
        • Internal storage Window
        • Show data log window
          • Export Configurator Window
        • Export settings window
        • TCP/IP
          • Configuring Wi-Fi settings to Start up a Pro Device.
      • Quick Start Guide
        • Preparation of Configuration
          • CAN Log All Configuration
          • Logging Using Filters
          • Logging Using J1939 Filters
          • Using the UDS function
          • Logging Analog Channels
          • Logging Digital Channels
          • Logging Accelerometer data
          • Logging Gyroscope data
          • Logging GNSS data
        • Advanced Configuration
          • Setup Cloud Settings
            • Mobile Settings
            • Wi-Fi Settings
            • FTP Settings
              • Steps to add new FTP settings using ReXdesk
              • Steps to enable FTP configuration in the ReXgen logger.
            • AWS Settings
              • Steps to add new AWS settings using ReXdesk
              • Steps to enable AWS configuration in the ReXgen logger
          • Upload configuration to the logger via FTP
          • Upload configuration to the logger via AWS S3 bucket
          • Trigger-Based Logging
          • Periodic CAN/CAN FD Transmission
          • HW Info Tool
          • Snapshot Tool
        • Retrieving Raw Data Log
        • One-Click Export after Linking DBC to CAN/CAN FD Bus
        • Exporting Data using CAN/CAN FD DBC File
        • Viewing Live Data
        • Log OBD2 Mode 1
      • Appendix 1 - CAN ERROR Definitions
      • Appendix 2 – Digital Input Functions
      • Appendix 3 – GNSS Orientation Guide
        • GNSS Positioning
        • Dead Reckoning
          • IMU Orientation in ReXgen Air devices
          • IMU Orientation in ReXgen Pro devices
        • Geofencing
      • Appendix 4 – Using the LTE Debug Tool
      • Appendix 5 – Setting up a digital trigger in ReXgen
      • Appendix 6 – ReXdesk CLI Manual
        • Convert-file
        • Convert-folder
        • Configure
        • Reflash
        • Format
    • ReXdesk CLI Guide
      • Convert-file
      • Convert-folder
      • Configure
      • Reflash
      • Format
    • ReXdesk Convert Guide
      • Convert-file
      • Convert-folder
      • Configure
      • Reflash
      • Format
Powered by GitBook
On this page
  • Consists of
  • Sampling Rate
  • Platform:
  • GNSS Type
Export as PDF
  1. ReXdesk : ReXgen Series Configuration Software
  2. ReXdesk Manual
  3. Appendix 3 – GNSS Orientation Guide

GNSS Positioning

Consists of

Sampling Rate

This allows users to define the desired sampling rate in Hz, the maximum being 30Hz.

Platform:

This lists the various dynamics models/environments supported for a well-defined configuration:

  • Portable

  • Stationary (Static- no movement)

  • Pedestrian

  • Automotive

  • Sea

  • Airbourne up to 1g/2g/4g

  • Wrist

  • Motorbike

  • Robotic Lawn Mower

  • Electric Kick Scooter

GNSS Type

The GNSS module used in Influx Technology's ReXgen Air device supports receiving and tracking from various Global Navigation Satellite Systems. ReXgen Air device Supports the following GNSS(s)'

  • Default

  • GPS (United States)

  • Galileo (European Union)

  • GLONASS (Russia)

  • BeiDou (China)

  • GPS + Galileo

  • GPS + Galileo + GLONASS

  • GPS + Galileo + BeiDou

  • GPS + BeiDou

  • Galileo + GLONASS

  • Galileo + BeiDou

  • GLONASS + BeiDou

Notes:

  • A concurrent reception of GPS and GLONASS is enabled by default.

  • Beidou, Glonass and Galileo can not be enabled together.

Configure using ReXdesk Software from Influx

PreviousAppendix 3 – GNSS Orientation GuideNextDead Reckoning

Last updated 10 months ago