Pinout of the Multi Connect Cable

The Standard Display Cable may be connected to the multi-connect cable's AUX cable to connect it to the Rebel CT or LT Loggers. The pinout is as follows:

AUX (The port of the Multi Connect Cable that is typically used with the Rebel Dash)

Female 9-pin Standard D-Type Connector

DB9	Pin Function
Pin 2	CAN 1(MS) L
Pin 3	Ground
Pin 5	Ground
Pin 7	CAN 1(MS) H
Pin 9	Power Supply Switched

CAN+PWR (This Connector is used to power the Logger; e.g. it could be powered via the diagnostics connector of a vehicle connected to the OBD2 to DB9 Cable.)

Male 9-pin Standard D-Type Connector

DB9	Pin Function
Pin 1	CAN 1 (MS) L
Pin 2	CAN 0 (HS) L
Pin 3	Ground
Pin 4	K-Line
Pin 5	Power Ground
Pin 7	CAN 0 (HS) H
Pin 8	CAN 1 (MS) H
Pin 9	Power Supply 4.5-36V (10-32V is required for the Rebel Dash to operate)

Digital/Analog (This Connector connects Digital and Analog signals to the Logger.)

Female 15-pin Standard D-Type Connector

DB15	Pin Function
Pin 2	Digital I/0 1
Pin 3	+4.5V Instrumentation
Pin 4	Ground
Pin 6	Analog Ground
Pin 7	Ain1 inst
Pin 8	Ain3 inst
Pin 9	Digital I/0 0
Pin 10	Digital I/0 2L
Pin 11	Ground
Pin 13	Wake-Up #
Pin 14	Ain0 inst
Pin 15	Ain2 inst

LAN/CAN (Used for connecting CAN2 and Ethernet to the Logger.)

Female 9-pin Standard D-Type Connector

DB9	Pin Function
Pin 1	Lan RX-
Pin 2	CAN 2 (Inst) L
Pin 3	Power Ground
Pin 4	Lan TX+
Pin 5	Ain0 inst
Pin 6	Lan RX+
Pin 7	CAN 2 (Inst) H
Pin 8	Lan TX-
Pin 9	Digital I/O 3 or Power Supply Switched

OBD&INST (The multi-connect cable attaches to the Logger via this connector.)

Female 25-pin Standard D-Type Connector

DB25	Pin Function
Pin 1	Ain3 inst
Pin 2	LAN RX-
Pin 3	LAN TX-
Pin 4	Ain1 inst
Pin 5	Wake-UP#
Pin 6	CAN 1 (MS) L
Pin 7	CAN 0 (HS) L
Pin 8	K-Line
Pin 9	4.5-36V (10-32V is required for the Rebel Dash to operate)
Pin 10	+4.5V instrumentation
Pin 11	Digital I/O 2
Pin 12	Digital I/O 0
Pin 13	CAN 2 (INST) L
Pin 14	Ain2 inst
Pin 15	LAN TX+
Pin 16	LAN RX+
Pin 17	Ain0 inst
Pin 18	Analog Ground
Pin 19	CAN 1 (MS) H
Pin 20	CAN 0 (HS) H
Pin 21	Ground
Pin 22	Power Ground
Pin 23	Digital I/O 3/+Vd
Pin 24	Digital I/O 1
Pin 25	CAN 2 (INST) H

Note:

• Pins not mentioned in the description table(s) are NC.