Female 25-pin standard D-Type connector with screws
Pin No
Pin Function
Pin 1
Analog Input 3 - do not apply voltages outside of the -10 to +10V range
Pin 2
LIN 1
Pin 3
CAN/CAN FD 3 L
Pin 4
Analog Input 1 - do not apply voltages outside of the -10 to +10V range
Pin 5
Wake-Up pin to wake logger from sleep mode (for use see Appendix 1)
Pin 6
CAN Bus 1 (Medium Speed Bus) Low Signal
Pin 7
CAN Bus 0 (High Speed Bus) Low Signal
Pin 8
K-Line (1 wire bus) of ISO 9141
Pin 9
4.5-36V Supply Voltage
Pin 10
+4.5V Instrumentation Supply Voltage, ensure that current draw is not more than 100mA
Pin 11
Digital Input or Output 2 - When used as an input do not apply voltages outside of the 0 to +12V range, when used as an Output ensure that current draw is not more than 100mA.
More information on use ofthis pin can be found in Appendix 2 and 3
Pin 12
Digital Input or Output 0 - When used as an input do not apply voltages outside of the 0 to +12V range, when used as an Output ensure that current draw is not more than 100mA.
More information on use ofthis pin can be found in Appendix 2 and 3
Pin 13
CAN/CAN FD Bus 2 (Instrumentation Bus) Low Signal
Pin 14
Analog Input 2 - do not apply voltages outside of the -10 to +10V range
Pin 15
LIN 0
Pin 16
CAN/CAN FD 3 H
Pin 17
Analog Input 0 - do not apply voltages outside of the -10 to +10V range
Pin 18
Analog Ground
Pin 19
CAN Bus 1 (Medium Speed Bus) High Signal
Pin 20
CAN Bus 0 (High Speed Bus) High Signal
Pin 21
Ground
Pin 22
Power Ground
Pin 23
Digital Input or Output 3 (can also be used as a switched power supply +Vd)
Pin 24
Digital Input or Output 1 - When used as an input do not apply voltages outside of the 0 to +12V range, when used as an Output ensure that current draw is not more than 100mA.
More information on use ofthis pin can be found in Appendix 2 and 3
Pin 25
CAN/CAN FD Bus 2 (Instrumentation Bus) High Signal