The Rebel LT (RC5-2) (INF 2101)
The Optional GPS Connector is a Male SMB Connector.
Pin No
Pin Function
Pin 1
Radio Frequency Signal Input
Pin 2
Ground
The USB Connector is a USB Series “B” Receptacle Interface.
Pin No
Pin Function
Pin 1
VBUS USB supply voltage 5V
Pin 2
Data- line of USB this signal utilises NRZI line coding
Pin 3
Data+ line of USB this signal utilises NRZI line coding
Pin 4
Ground
The Optional GPRS Connector is a Male RP-SMA Connector.
The OBD & INST Connector is a Male 25-pin Standard D Type Connector nut.
Pin No
Pin Function
Pin 1
Radio Frequency Signal Input
Pin 2
Ground
Pin No | Pin Function |
Pin 1 | Analog Input 3 - do not apply voltages outside of the -10 to +10V range |
Pin 2 | NC |
Pin 3 | NC |
Pin 4 | Analog Input 1 - do not apply voltages outside of the -10 to +10V range |
Pin 5 | Wake-Up pin to wake logger from sleep mode (for use, see Appendix 1) |
Pin 6 | CAN Bus 1 (Medium Speed Bus) Low Signal |
Pin 7 | CAN Bus 0 (High-Speed Bus) Low Signal |
Pin 8 | K-Line (1 wire bus) of ISO 9141 |
Pin 9 | 4.5-36V Supply Voltage |
Pin 10 | +4.5V Instrumentation Supply Voltage, ensure that the current drawn is not more than 100mA |
Pin 11 | Digital Input or Output 2 - Do not apply voltages outside of the 0 to +12V range when used as an input. When used as an Output, ensure that the current drawn is not more than 100mA. More information on the use of this pin can be found in Appendix 2 and 3 |
Pin 12 | Digital Input or Output 0 - Do not apply voltages outside the 0 to +12V range when used as an input. When used as an Output, ensure that the current draw is not more than 100mA. More information on the use of this pin can be found in Appendix 2 and 3 |
Pin 13 | NC |
Pin 14 | Analog Input 2 - do not apply voltages outside of the -10 to +10V range |
Pin 15 | NC |
Pin 16 | NC |
Pin 17 | Analog Input 0 - do not apply voltages outside of the -10 to +10V range |
Pin 18 | Analog Ground |
Pin 19 | CAN Bus 1 (Medium Speed Bus) High Signal |
Pin 20 | CAN Bus 0 (High-Speed Bus) High Signal |
Pin 21 | Ground |
Pin 22 | Power Ground |
Pin 23 | Digital Input or Output 3 (can also be used as a switched power supply +Vd). When used as an input, do not apply voltages outside of the 0 to +12V range |
Pin 24
| Digital Input or Output 1 - Do not apply voltages outside of the 0 to +12V range when used as an input. When used as an Output, ensure that the current drawn is not more than 100mA. More information on the use of this pin can be found in Appendix 2 and 3 |
Pin 25 | NC |
