1 of 34

INF 42XX.XX

INF4202: Rebel FlexRay/CAN Breakout Cable

INF4203: Rebel LT CAN Bus Breakout Cable

INF4204.1: Rebel Multi-Connect Cable (5 Lead)

INF4206: 180-degree OBD Type-B Cable to Rebel Data Logger Adapter cable

INF4210: Rebel Dash Cable

INF4211: 25-way to 25-way D-sub shielded cable

INF4212.0: 9-way D-Sub screw terminal Male

INF4212.1: 9 way D-Sub screw terminal Female

INF4213: Multi-Connect digital and analog I/O terminal

INF4214: 25-way D-sub screw terminal Female

INF4216: ReXgen Air cable automotive connector to 25 way D-sub

INF4202: Rebel FlexRay/CAN Breakout Cable

Connects to the expansion port of the Rebel CT FlexRay and Rebel CT 7 data logger. The LIN bus, CAN buses and FleXray channels are connected to separate 9-Way D-Sub moulded connectors. This cable consists of two FlexRay connectors, three CAN buses connectors and one LIN connector.

Tech Specs:

Expansion Port Connector

Female 15-pin 1.27mm pitch micro-D connector

Note:

Pins not mentioned in the description table(s) are NC.

FlexRay 1 Connector

Male 9-pin standard D-type connector

Note:

Pins not mentioned in the description table(s) are NC.

FlexRay 2 Connector

Male 9-pin standard D-type connector

Note:

Pins not mentioned in the description table(s) are NC.

CAN 4 and LIN 3 Connector

Female 9-pin standard D-type connector

Note:

Pins not mentioned in the description table(s) are NC.

CAN 5 Connector

Female 9-pin standard D-type connector

Note:

Pins not mentioned in the description table(s) are NC.

CAN 6 Connector

Female 9-pin standard D-type connector

Note:

Pins not mentioned in the description table(s) are NC.

INF4203: Rebel LT CAN Bus Breakout Cable

This 230 mm breakout cable is supplied with each Rebel LT data logger making it suitable to connect devices that are compliant with the standard CIA 9-PIN D-Sub pinout directly to the data loggers.

The cable has one 25-Way D-Sub connector, which connects directly to the Rebel LT data logger and two 9-Way D-Sub connectors as described here:

POWER/CAN0 enables power and a CAN bus to be connected to the Rebel data logger. Type - 9-Way D-Sub (Plug)
AUX/CAN 1 enables a CAN bus to be connected to the Rebel data logger. This cable can also be used to supply auxiliary power from the Rebel data loggers to other devices that will be powered from the data logger. Type 9-Way D-Sub (Socket)
OBD and INST Connector

This cable is suitable for LT Data Loggers and can also be used to supply power directly to the K-series modules or the Rebel Dash from the Rebel data loggers. This helps to make the installation of our data loggers and instrumentation modules easy and with less cables required.

Tech Specs:

OBD and INST Connector

Note:

Pins not mentioned in the description table(s) are NC.

CAN0/PWR/K-Line Connector

Male 9-pin standard D-Type connector with nuts

Note:

Pins not mentioned in the description table(s) are NC.

AUX/CAN 1 Connector

Female 9-pin standard D-Type connector with screws

Note:

Pins not mentioned in the description table(s) are NC.

INF4204.1: Rebel Multi-Connect Cable (5 Lead)

This 230 mm breakout cable is supplied with each Rebel CT data logger making it suitable to connect devices that are compliant with the standard CIA 9-pin D-Sub pinout directly to our data loggers.

The cable has one 25-Way D-Sub connector, which connects directly to the Rebel CT data logger and four 9-Way D-Sub connectors to connect up to the separate CAN buses as described here:

POWER/CAN0 enables power and a CAN bus to be connected to the Rebel data logger. Type
- 9-Way D-Sub (Plug)
AUX/CAN 1 enables a CAN bus to be connected to the Rebel data logger and can be used to supply auxiliary power from the Rebel data loggers to other devices. Type -9-Way D-Sub (Socket)
CAN 2 Type - 9-Way D-Sub (Socket)
CAN 3 Type - 9-Way D-Sub (Socket)

Additionally, a 15-Way D-Sub (Socket) connector enables easy connection to the data logger analog and digital pins.

Tech Specs:

Rebel Data Logger Connector

Female 25-pin standard D-Type connector with screws

WARNING

DO NOT SHORT CIRCUIT OR OVERLOAD ANY DIGITAL I/O e.g. IF USING DIGITAL INPUT OR OUTPUT 3 TO SUPPLY POWER TO A K-BOX OR A REBEL DASH, DO NOT CONNECT MORE THAN 1 K-BOX TO THIS OUTPUT AND BE CAREFUL THAT NO SHORT-CIRCUIT OCCURS.

WARNING

DO NOT SHORT CIRCUIT OR OVERLOAD PIN10 (+4.5V INSTRUMENTATION)

CAN0/PWR Connector

Male 9-pin standard D-type connector with nuts

Note:

Pins not mentioned in the description table(s) are NC.

AUX/CAN1 Connector

Female 9-pin standard D-type connector with screws

WARNING

DO NOT SHORT-CIRCUIT OR OVERLOAD POWER SUPPLY SWITCH e.g. DO NOT CONNECT MORE THAN 1 K-BOX TO THIS OUTPUT AND BE CAREFUL THAT NO SHORT-CIRCUIT OCCURS.

Note:

Pins not mentioned in the description table(s) are NC.

CAN 2/LIN 0 Connector

Female 9-pin standard D-type connector with screws

Note:

Pins not mentioned in the description table(s) are NC.

CAN 3/LIN 1 Connector

Female 9-pin standard D-type connector with screws

Note:

Pins not mentioned in the description table(s) are NC.

Digital & Analog Connector

WARNING

DO NOT SHORT CIRCUIT OR OVERLOAD ANY DIGITAL I/O e.g. BE CAREFUL THAT NO SHORT-CIRCUIT OCCURS WHEN USING AN I/O AS AND OUTPUT

WARNING

DO NOT SHORT CIRCUIT OR OVERLOAD PIN10 (+4.5V INSTRUMENTATION)

Note:

Pins not mentioned in the description table(s) are NC.

INF4206: 180-degree OBD Type-B Cable to Rebel Data Logger Adapter cable

This cable is ideal if you require power to a K-Series devices or Rebel data logger without the usual access to the OBD port. Simply use either the vehicle auxiliary power outlet or banana plugs (battery) for the power supply.

Connector A, is a 9 Way D-Sub (Socket) connected to power from either a vehicle auxiliary power outlet (cigar lighter) OR banana plugs and the CAN bus (PIN 2 &7) Connector B, is a 9 Way D-Sub (Plug) connected to the CAN bus (PIN 2 & 7).