Click the ‘Settings’ toolbar icon on the Logger Tab
Click the ‘WiFi Settings’ Tab in the ‘Logger Information’ window.
You can use the Scan WiFi button to find the WiFi Network you wish to Join or enter it and the encryption type manually. You will also need to enter the PSK (Pre Shared Key) to gain access to the network.
For a Rebel to successfully communicate with the StreamLog server a number of steps WiFi or GPRS Settings need to be configured.
Checking communication between the Rebel (GPRS) and the StreamLog Server
Checking communication between the Rebel (WiFi) and the StreamLog Server
The communications between the Rebel (GPRS) and the StreamLog server can be tested by running the StreamLog Connection Assistant on the PC where DiaLog is installed, once you launch the Application you can see a diagram representing the configuration you wish to use.
Once you are ready press the Check GPRS Connection button to test the Connection between the Rebel (GPRS) and the StreamLog Server.
You will be asked to plug the Logger in and ensure that 12V is supplied via the OBD Connector.
After confirming you will see the GPRS connection is started and the Rebel will log into the access point as with the Username and Password it is configured to use, the Logger must have a SIM Card installed with sufficient credit to allow communication.
The following shows successful communication between the Rebel (GPRS) and the StreamLog Server.
Click the ‘Settings’ toolbar icon on the Logger Tab.
Click the ‘GPRS Settings’ Tab in the ‘Logger Information’ window.
Configure the APN, Default User and Password fields according to your GPRS Data Provider or ‘Load from Presets’.
A Data Enabled SIM Card with an appropriate contract or credit will be required and must be installed in the Logger.
Click ‘Update’ to save the settings to the logger.
The communications between the Rebel (WiFi) and the StreamLog server can be tested by running the StreamLog Connection Assistant on the PC where DiaLog is installed; once you launch the Application, you can see a diagram representing the configuration you wish to use.
Once you are ready press the Check WiFi Connection button to test the Connection between the Rebel (WiFi) and the StreamLog Server.
You will be asked to plug the Logger in and ensure that 12V is supplied via the OBD Connector.
After confirming,
you will see the WiFi connection is started and the Rebel will log into the access point as with the PSK security settings it is configured to use.
The following shows successful communication between the Rebel (GPRS) and the StreamLog Server.
