DiaLog must be configured to be able to interact with the StreamLog Server. To do this a dedicated configuration file supplied with StreamLog must be assigned:

“StreamLog.ssf”

The StreamLog configuration file must be placed within the parent DiaLog installation directory. This is arbitrary:

“C:\Program Files\Influx Technology”

This method is only required for the initial assigning of a .SSF file. This configures DiaLog to allow access to the StreamLog features and in future all management of the configuration files can be performed within the StreamLog settings window in DiaLog. This is accessed using the either the StreamLog Tab as shown below:

Once the Surefleet.ssf file is in place the StreamLog Settings button will show you details of the Server and Database that you are connecting to as follows:

A new configuration file is assigned to DiaLog using the ‘Add Security StreamLog file’ toolbar icon at the top of the window.

Opens a dedicated window allowing the user to locate and select a .SSF configuration file.

Once a file has been selected, it is listed in the ‘Security files’ panel by location. Multiple files can be assigned to an installation of DiaLog simultaneously. The highlighted file will be the one used by DiaLog to access StreamLog.

The communications between DiaLog and the StreamLog server can be tested by running the StreamLog Connection Assistant on the PC where DiaLog is installed; once you launch the Application, you can see a diagram representing the configuration you wish to use.

Once you are ready, press, the Check DiaLog Connection button to test the Connection between the PC running DiaLog and the StreamLog Server.

The following window will be displayed.

Press the Load Security File Button to Load the “StreamLog.ssf” file.

Then select your file as follows

Then Enter the Serial Number of your Logger exactly as it is printed on the Sticker on the Device.

Now click Check Client StreamLog.

If The PC is able to simulate correct communications between DiaLog and the StreamLog Server, the following Message will be displayed.