The communications between the Rebel (WiFi) and the StreamLog server can be tested by running the StreamLog Connection Assistant on the PC where DiaLog is installed; once you launch the Application, you can see a diagram representing the configuration you wish to use.
Once you are ready press the Check WiFi Connection button to test the Connection between the Rebel (WiFi) and the StreamLog Server.
You will be asked to plug the Logger in and ensure that 12V is supplied via the OBD Connector.
After confirming,
you will see the WiFi connection is started and the Rebel will log into the access point as with the PSK security settings it is configured to use.
The following shows successful communication between the Rebel (GPRS) and the StreamLog Server.
