When a ‘Project’ or ‘Configuration’ group is selected, it lists all the Rebels assigned and allows their addition/removal and assigning of ‘vehicles’ to ‘loggers’.

When a single ‘Configuration’ revision is selected, it displays the associated Logger and allows its removal and assigning of ‘vehicles’.

When a ‘Project’ or ‘Configuration’ group is selected, it lists all the Rebels assigned and allows their addition/removal and assigning of Engineers.

This tab provides the complete list of vehicles running under a selected project.

It also has options to view the live GPS location of the selected vehicle.

The ‘Editors’ tabs allow the user to navigate between the main features in StreamLog for the selected item in the ‘Projects’ panel.

Sessions Tab

Loggers Tab

Vehicles Tab

Events Tab

Engineers Tab

Live View Tab

Fleet Overview Tab

Fleet Reports Tab

The ‘Events’ Tab lists all the ‘Triggers’ in the ‘Configuration’ within the ‘Project’, along with information such as the number of events and the first and last occurrence.

The panel also displays the actual events and their recorded location (if available).

Triggers set within the ‘Configuration’ found in the selected ‘Project’ describe each trigger and the number of events that occurred for each, with their first and last occurrences.

Events position provides a graphical plotting of the vehicle location for each event for the selected trigger.

The ‘Events tab’ lists all the events recorded on the selected trigger, providing information such as the Logger and VIN for the event and the ‘Vehicle Structure’ used to record the event and the IVD file in which the event is recorded.

Allows recorded Data to be visualised, deleted and saved for further analysis.

Extract Stream Data

It is possible to import the data into a DiaLog oscilloscope for more detailed data analysis and export.

Select the IVD file you wish to look at and click extract stream data.

This will load the recorded ‘Stream Data’ into a DiaLog oscilloscope. Depending on the size of the data log, this process may take a little while—a progress window is displayed.

Once the data has loaded, the oscilloscope will be shown.

Once the scope has been loaded, it will remain accessible in StreamLog and DiaLog via either the ‘Scope List’ or ‘Show Scope’ toolbar icons. This allows ‘Stream Data’ logs to be loaded to DiaLog scopes and accessed via DiaLog after StreamLog has been closed. This gives the user access to the complete DiaLog scope functionality, including data export options. Full details can be found in the DiaLog documentation.

This tab provides the Live view with different drive cycles coloured in different colours. It enables the easy selection of Day filters. It also has a set of tools for live data monitoring (Dials, Labels and Bars).

To add dial, bar or labels in the Live View display screen, click on ‘page 1’ below ‘Live data tools.

Clicking next to ‘page 1’ adds multiple pages to the Live data tools.

Clicking on ‘Add dial/bar/label’ opens the following window for ‘Dial settings’.

Add Dial

• Parameters— Allows the users to choose which parameters they wish to see.

• Units— Defines the units of the chosen parameters.

• Divisions— The users can define the number of divisions on a dial/bar/label chosen.

• Min. Value— Allows the user to assign a minimum value for the chosen parameter.

• Max. Value— Allows the user to assign a maximum value for the chosen parameter.

A total of six dials/bars/labels can be displayed on one page, and multiple pages can be added.

Fleet DTC page

Report Diagnostic Trouble Codes: By Group, By Vehicle, By Date, etc.

Fleet Overview page

This tab provides the complete overview of the fleet. It gives a graphical view of the numbers of connected loggers & the number of vehicles with DTC’s.

Fleet Distance Page

This tab provides the complete details about the distance travelled by vehicles under the fleet. It also gives a graphical representation of the same.

Active Vehicles Page

This tab provides the complete list of active vehicles for the specified time.

Fleet Parameter Page

This tab provides the statistical report of fleet parameters per vehicle.

• Users can select any measurement item to be monitored continuously.

• Sampled results are shown from the data compiled across the fleet.

• Key parameters can be linked across different modules.

This tab enables the generation of reports on fleet parameters. Users can select different parameters and generate a report with calculations (Average, Sum, Min & Max).

Click on the ‘Add Report’ tab to create a new report.

In the report generator window, assign the report name.

Choose generate points:

• Once per day: points will be generated after monitoring the data for the whole day.

• Once per file: points will be generated for each file.

• Once per trigger: points will be generated for all occurrences of trigger conditions.

Select items from fleet parameters and choose the statistical options.

In the following section user will have the option to choose the monitoring option:

Snapshot: To be used when monitoring the data during a trigger event.

Filter: To be used when you want to monitor the data continuously based on another parameter.

Snapshot trigger will take the snapshot of requested parameters when given conditions are met.

Add filter will monitor and find the statistical information (min, max, avg, sum). about the parameter while filter conditions are satisfied.

From additional options, we can select vehicles whose reports are to be generated.

We can enter a threshold value which will be added to the report.

Extracting report

• Show Report - We can view the report by clicking show report.

• Show combine report – This will generate a combined report for a vehicle.

• Email report – We can Email the combined report.