LogoLogo
Home
  • 🏠Home
  • Frequently Asked Questions
    • ReXgen Series
      • ReXgen 1 FAQs
      • ReXgen 2 FAQs
      • ReXgen 2 IMU FAQs
      • ReXgen Air FAQs
    • Rebel Series
      • Rebel LT FAQs
      • Rebel CT FAQs
    • K-Series
      • K-Box FAQs
      • K-AN8 FAQs
      • K-TC FAQs
    • Configuration Software(s)
      • ReXdesk FAQs
      • DiaLog FAQs
      • K-CAL FAQs
      • StreamLog FAQs
      • Module Analyser FAQs
Powered by GitBook
On this page
Export as PDF
  1. Frequently Asked Questions
  2. ReXgen Series

ReXgen 1 FAQs

PreviousReXgen SeriesNextReXgen 2 FAQs

Last updated 1 year ago

What happens if the logger storage gets full?

The logger can continue logging after deleting the first file on a FIFO basis or can stop logging and be configured via ReXdesk, which can format the logger. (FIFO is enabled by default.)

How to enable Pass-thru funtionallity of a ReXgen logger (J2534)?

Is it possible to interface ReXgen 1 with KBOX?

Yes, It will work with Kbox, but you must power the KBox from a separate power source since ReXgen doesn’t have Auxilary Power Out.

Where can I get the Driver installer?

It is available under the Influx technology folder in the Start menu.

Where can I find the Pin out details for ReXgen 1?

What is the current consumption of ReXgen 1?

Normal Operation: up to 50 mA at 12 V, Normal Sleep <17mA & Deep Sleep: <2 mA

How to get real-time physical data?

ReXgen doesn't provide real-time physical data, user will have to retrieve the data log and post-process using a DBC file to view the physical data.

ReXgen as Pass-Thru
ReXgen 1 Pinout details
Page cover image