ReXgen 1

There is one 9-pin Standard D-Type connector.

884KB

ReXgen1 flyer_V1.3.pdf

pdf

Connector

Pin No	Pin Function
Pin 1	NC
Pin 2	CAN-Low
Pin 3	GND
Pin 4	Nc
Pin 5	Power GND
Pin 6	NC
Pin 7	CAN-High
Pin 9	Power Supply 5V to 27V

Notes:

• The connector needs to be tightened properly to make a proper connection, ensuring reliable operation.

• Each end of the CAN bus must be terminated with a 120 Ohm resistor across CAN H & CAN L.

• Do not short-circuit any pins.

• The maximum safe applied voltage for analog and digital I/P is ± 28 V.