Upload configuration to the logger via AWS S3 bucket
This step-by-step guide explains uploading a new configuration to the AWS S3 bucket by placing the .rxc file in the logger root folder..
Step 1
Note:
Before you begin the steps, ensure your logger is connected to the server with an existing configuration.
Make the new configuration.
Enable AWS from the Device Configuration menu.

Step 2
Save the Project with the name you require for the configuration.
Under the ‘Config’ tab, select Export from the drop-down menu.
Select ‘Export ReXgen Configuration (rxc)’ from the listed options.

Step 3
Save the file with the desired name.
Click ‘Save’.
Once saved, rename the file as ‘config.rxc.’
Note:
Ensure that you rename the file as 'config.rxc' only.
If the xml is custom-made, ensure to change the guid of the xml file whenever it is sent through the server.

Step 4
Add to your config folder in your S3 bucket by adding it to the root folder of the logger.

Last updated