Upload configuration to the logger via FTP

This step-by-step guide explains uploading a new configuration to the FTP Server by placing the .rxc file in the logger root folder.

Step 1

Note:

• Before you begin the steps, ensure your logger is connected to the server with an existing configuration.

• Make the new configuration.

• Enable FTP from the Device Configuration menu.

Note:

• Set your configuration check time in the given section while enabling FTP.

Step 2

• Save the Project with the name you require for the configuration.

• Under the ‘Config’ tab, select Export from the drop-down menu.

• Select ‘Export ReXgen Configuration (rxc)’ from the listed options.

Step 3

• Save the file with the desired name.

• Click ‘Save’.

• Once saved, rename the file as ‘config.rxc.’

Note:

Ensure that you rename the file as 'config.rxc' only.

Step 4

• Upload the configuration file to your FTP folder by adding it to the root folder of the logger.