Logging Analog Channels

• Create a new project.

• Drag and drop the Analog tool to the Channels area of the configuration window.

• Select Analog channel from the Analog channel drop box.

  • Enter the sampling rate required for logging in to the sampling rate column.

  • Define the ‘Formula’ for scaling the sensor output to engineering units.

    • A- is the slope or the scale factor

    • X- is the input (volts)

    • B- is the offset, and the output will be engineering units.

• Click ‘Add’ to add the selected channel.

• Click “Run Configuration”, save the project and provide a name for the project. The logger will create files with the name of the project.

The configuration will be loaded in the data logger, and logging will start immediately.

How to configure analogue and digital channels using ReXdesk