Logging Using J1939 Filters
Last updated
Last updated
Create a new project.
Drag and drop the J1939 filter tool into the bus from which the user will log data.
*User can add the CAN Error tool to the bus for logging CAN errors. See Appendix 1 for various error codes.
Click on the J1939 filter tool icon to configure the filter settings.
Enter the filter values.
Users can use a combination of SA, DA & PGN, or they can be used individually.
Click the browse icon to import the PGN values using a J1939 DBC.
Once you have added the value, click ‘Add’.
Users can Add, Edit or Remove filters added to the configurations.
*User can add the CAN Error tool to the bus for logging CAN errors.
Click on the Storage icon and configure the Log file settings.
Connect the logger to the PC via USB.
Status Bar will display the logger status and time information.
Click “Run Configuration”, save the project and provide a name for the project. The logger will create files with the name of the project.
The configuration will be loaded in the data logger, and logging will start immediately.
How to configure the ReXgen data logger to log data using the .
