Software Versions

DiaLog is available in several software versions, supporting different levels of functionality. The features supported and their relevant sections in this document are summarised below:

	Remote	Configurator	Standard	Plus
Industry standards
Import ASAM A2L				X
Import CAN and CAN FD DBC		X	X	X
Import LIN LDF		X	X	X
Import Diagnostic Data Files ODX, GDX, MDX		X	X	X
Import Fibex (required for FlexRay)				X
Import IVS (Influx Configuration File)	X	X	X	X
DBC Editor			X	X
ODX Editor			X	X
Export data formats
Vector ™MDF		X	X	X
Vector BLF (CAN trace)		X	X	X
ASAM MDF4		X	X	X
Vector ASC (CAN trace)		X	X	X
Matlab™ Mat			X	X
NCode™ S3			X	X
Microsoft™ Excel		X	X	X
National Instruments ™ TDM			X	X
GPS data (kml)			X	X
Network Protocols
OBD II (ISO 15765)	n/a	X	X	X
CCP/xCP (CAN and FlexRay)	n/a			X
Extended ISO14229 (UDS)	n/a	X	X	X
CAN/CAN FD (x4 CAN Buses)	n/a	X	X	X
CAN/CAN FD (x7 CAN Buses)	n/a			X
FlexRay	n/a			X
J1939	n/a	X	X	X
K-LINE	n/a		X	X
LIN	n/a		X	X
Advanced Network Functions
Create Tx periodic CAN Frames (Works with the Rebel Dash)			X	X
Create a CAN message for periodic transmission or on a trigger event.				X
Create one-shot data lists for data to be acquired on the event only.				X
Create/edit simple triggers (Start/Stop/Mark event)		X	X	X
Create/edit advanced triggers (Read DTC, Read OBD, Run Custom (Event)				X