LogoLogo
Home
  • DiaLog Software
  • DiaLog Software Manual
    • Introduction
      • Overview
      • Licence Agreement
      • Limitation of Liability
      • System Requirements
      • Software Versions
    • Getting Started
      • Software Installation
      • Software Introduction
        • Database Panel
        • Navigation Bar
          • Configuration Menu
          • Advanced Configuration Menu
          • Project Menu
          • Import Menu
          • Export Menu
          • Presets Menu
          • Logger Menu
          • Analysis Menu
          • StreamLog Menu
          • Settings Menu
        • Import Tabs
        • Main Panel
        • Message Panel
      • GPRS Settings
      • Wi-Fi Settings
      • Steps to Enable FIFO
      • How to obtain the diagnostic log before contacting support
  • Quick Start Guide
    • Set the Date and Time of the Rebel Data Logger.
    • Format the SD card of the Rebel Data Logger.
    • Reflash firmware of Rebel Data Logger.
    • View Live data using DaiLog
    • Manage projects in Dialog software
      • Create a new project
      • Export a project
      • Delete a project
      • Import a project
    • Create and manage a Configuration in Dialog Software
    • Configure Rebel data logger to record raw CAN messages
      • Record Raw CAN Bus data
      • Reconfigure the Rebel data logger
      • View Raw CAN data
    • Configuring Rebel Data Logger with DBC file
      • Log CAN signals using a DBC file
      • Reconfigure the rebel data logger.
    • Log data using an A2L file
      • Log data using an A2L file
      • Reconfigure the rebel data logger
    • Configuring Rebel Data Logger to record GNSS data
      • Creating a Configuration to Record GNSS data
      • Reconfigure the rebel data logger
    • Configure Analogue and Digital Inputs using DiaLog
      • Configure Analogue and Digital inputs in Dialog software using the rebel data logger
      • Reconfigure the rebel data logger
    • Using Digital Switch to Start Logging in a Rebel Logger
    • Exporting an IVD file
      • Extract an IVD file using the DiaLog software
      • Export an IVD file
    • Interpolate or resample while exporting data
    • Import DBC signals to multiple log data using Batch Processing
    • Merge multiple log data from existing IVD files
      • Method 1
      • Method 2
      • Method 3
    • Export CAN trace, EOBD, Statistical report and DTC data using BP
    • Extracting data around specific triggers using Batch Processing
    • Various methods for exporting CAN trace
      • Export Raw CAN trace from IVD files
      • Export CAN trace log by adding DBC signals
    • Configuring Rebel Dash in Dialog Software
      • Steps to Reconfigure the Rebel data logger and Rebel Dash
    • Export data from Dialog's Configurator version
    • Configure SD card/Rebel data logger using Dialog remote
      • Formatting the Sd card and sending the configuration to it
      • Using tabs in Dialog Remote
        • Set Rebel time
        • Settings
        • Reflash Rebel
    • Log data using UDS in DiaLog Software
    • Create a shell script for converting files
    • Deactivating and Moving the License of Dialog software
      • Deactivate the DiaLog license
      • Move a DiaLog license from one PC to another
  • Appendix 1
    • Reflash
    • Edit PID Presets
    • License Manager
    • General Option of Navigation bar, Settings Menu
    • Data Option of the Navigation bar, Settings Menu
    • Protocol Priorities
  • Appendix 2
    • Glossary
    • CAN Modes
    • CAN Definitions
    • Standard OBD Periodic Identifiers
  • Appendix 3
Powered by GitBook
On this page
  1. DiaLog Software Manual
  2. Introduction

Limitation of Liability

  1. The information in the 'Influx Software' has been compiled from tests and measurements made on a small sample of vehicles with the appropriate mechanical and electronic systems and information in manuals produced by vehicle and electronic system manufacturers. However, all reasonable care has been taken to ensure the accuracy of the information in the 'Influx Software'. Neither the authors, Influx, nor Influx's agents may be held responsible for incorrect or inaccurate information or descriptions of test procedures.

  2. LIMITED WARRANTY: Influx warranties that the media on which the 'Influx Software' is supplied will be free from defects in materials or workmanship under normal use and service for 30 days from the date of receipt.

  3. Influx disclaims all other express or implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose for the 'Influx Software', any accompanying documentation and any accompanying hardware. The 'Influx Software' is used at your own risk.

  4. In no event shall Influx, its authors, nor anyone involved in the creation, production, sale or delivery of this product be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss) arriving out of the use of or inability to use this Influx product, even if Influx has been advised of the possibility of such damages.

  5. By using this 'Influx Software, ' you agree to be bound by all terms and conditions. Do not use the 'Influx Software' otherwise.

  6. If you do not agree with these conditions, you should promptly return the 'Influx Software' (including all media, documentation and packaging) to your supplier.

  7. None of the provisions affects your statutory rights. Where legislation disallows the exclusion or limitation of implied warranties, these will not apply to you.

PreviousLicence AgreementNextSystem Requirements

Last updated 1 year ago