Pinout Details: ReXgen 2/IMU

There are two connectors, a male and female 9-pin Standard D Type connector.

Connector A (Male D-Sub 9)

Male D-Sub 9 Connector

Pin No	Pin Function
Pin 1	Digital 1
Pin 2	CAN 0 – Low
Pin 3	GND
Pin 4	LIN
Pin 5	Power GND
Pin 6	Digital 0
Pin 7	CAN 0 – High
Pin 9	Power Supply 5V to 27V

Connector B (Female D-Sub 9)

Female D-Sub 9 Connector

Pin No	Pin Function
Pin 1	AnalogGND
Pin 2	CAN 1 – Low
Pin 3	GND
Pin 4	Analog IN 0
Pin 5	AnalogGND
Pin 6	Analog IN 1
Pin 7	CAN 1 – High
Pin 8	Clamp-15

Voltage Specifications

Bus and signals	Operating voltage	Safe applied voltage
Power supply - OBD	+5V to +27V	±34V
Power supply - USB	+4.5V to +5.5V	0V to +6V
CAN/CAN FD	+2V to +3V	±28V
ANALOG Input	±10 V	±28V
DIGITAL INPUT	LOW < +0.8 V HIGH > 2.5 V	±28V

Note:

• Pins not mentioned in the description table(s) are NC.

• Do not use the logger's USB port for data logging, as it may damage the USB port, and this won't be covered under warranty.