Steps to enable AWS configuration in the ReXgen logger
Last updated
Last updated
Prepare the base configuration for the logger.
In the Device Configuration window, Click on the ‘Upload’ tab.
Enable the ‘checkbox’ for ‘Enable Aws’.
For a single setting, details are auto-filled in the subsequent sections.
Users can select the desired setting from the corresponding drop-down menus for multiple settings.
Click the ‘Run’ tab in the Navigation bar.
Save the project:
a) Save project: allows you to save the project with the user-defined name.
b) Continue as “New Project”: saves the configuration labelled ‘New Project.’
Click ‘OK’ once the configuration is uploaded successfully.
