K-Series: Software Links
K-CAL- Latest Release Notes Version 3.38
New firmware v.10.10 (for K-TC_2.0 Devices only)Fixes
Fixed dbc export for TCxx.2 family devices Changing baud rate and serial number with USB for TCxx.2 devices J2534 for the Kvaser v3 interface can be initialized without restarting the tool Option Load at startup works in USB mode
Newly Added
Added group and scale option in oscilloscope measurement tab
Method to disable channels for TCxx.2 device so that client does not get random values for not connected sensors
K-CAL- Previous Release notes
Version 3.36
Release Notes added.
Fixed macandrv.dll, TCUSB.dll (rebuild in release mode).
Enabled changing baud rate in USB mode for TCxx devices (for TCxx.2 devices must be implemented).
Fixed programming issue.
Icon for ReXgen device.
Version 3.34
Tested pass-thru for Kvaser v3 interface.
Version 3.33
Present compensation of raw values for TCxx devices in calibration mode.
A new view of the calibration tab.
Improved calibration report.
Version 3.30
Support of KTCxx devices (Revision 2 of TCxx).
Scan baud rate option is available in GUI.
Splash form added.
Fixed illegal extended IDs issue.
Version 3.24
Implemented extended IDs for TCxx devices.
Version 3.23
Fixed exporting to DBC signals with tables and formulas for multi-devices connected.
Temperature logging at 50ms for the K-Box series.
Version 3.21
Fixed auto-assign ID for TCxx devices issue.
Version 3.20
Fixed some Measurement issues for TCxx devices.
Version 3.17
Added IEPE formula (sensitivity and offset).
Version 3.16
Can not use Rebel interface.
Connecting USB devices (memory stick, dongle, etc ...) disconnects the Rebel interface.
Version 3.15
During calibration, the 'Go to next channel' option is checked,
Wrong convert negative to positive nominal values.
Adding a new scope tag clears the channel custom names.
Export custom channel (Sensor) names to a .csv file.
An option to include the device serial number in the message name in the .bdc file.
Version 3.14
Basic support Kvaser USBcan Light 4xHS interface device (only channels 0, 1).
Fixed the issue with exporting the formula for A/D channels.
Version 3.13
Manage signal size, start bit, type, scale and offset.
Save/load signal properties to KVolt.
Option to save/load complex signals (with the same ID).
Version 3.12
KVolt support.
Commit configuration to KVolt device.
Load configuration from KVolt device.
Export / Import Kvolt configuration to DBC file.
Test KVolt configuration in network mode.
Test KVolt configuration in USB mode.
If you are adding/deleting items to the scope, do not restart.
Scope crashes using TCxx and USB connection.
Saving log to .csv, no information for process progress.
Version 3.10
Auto start calibration if the 'Go to next channel' option is checked..
Multiple scopes have been improved. There is a 10 scope limit, the last created can not be closed, start/stop only the last created, and a warning to preserve data when changing configuration.
Export two devices with the Rebel interface issue to DBC.
Version 3.11
RTD (Pt100, Pt1000) support.
IEPE support (not fully tested).
Version 3.9
KAn8 support - KBox with 8 Analog channels.
Version 3.8
Implemented support ADC rate below 1ms.
Bus loading info.
Stop transmitting during commit configuration or calibration.
CAN idents mismatch. When connecting two KBoxes, there is an issue with CAN idents for ADC signals.
The scope is not stable when using TCxx with a USB connection. When there is a disconnect, connect the USB.
Unable to export to Vector MDF .dat format.
Save/load from Matlab 5.0 *.mat format.
Export units to Dialog problem.
The last 4 channels for TC32 are not displaying.
Version 3.7
Fixed long-time scope logging with the Rebel interface device.
Version 3.6
Improved Scope - fixed some crashes.
K-Log Release Notes
Fixes/updates
Displays file count in the progress bar when downloading.
Displays feedback when configuration is sent to the device.
Fixes display of non-supported formats in the export window.
Improved data retrieving speed.
New Additions
Number of files and free space in eMMC display in internal storage.
Added thermocouple type selection for each channel.
Added cancel option when downloading files in the progress bar.
Known Issues:
Unable to download the files with Use full date/time format from the “Show data log “option
Merging with resampling crashes
Note:
⬇️ Microsoft dotnet Runtime 4.7
TC - 2.0 Firmware
Warning: The above firmware is only compatible with the latest KTC versions launched in October 2023. For the firmware for the old K-TC devices, contact our support team.
Last updated