K-AN8 FAQs

Is it possible to stack multiple K-AN8 devices?

Yes, it is possible.

Where can I get the Pinout details for a K-AN8 device?

PinOut Details

Where can we get the links to the softwares associated with K-AN8?

Software Links

Do we need to install drivers for K-AN8?

No, you don't need a driver for the k-series; it makes use of CAN to USB pass-thru driver

What is the resolution for K-AN8?

16bit

What is the accuray for K-AN8?

±0.0015%

What is the Voltage range a K-An8 can accept?

Up to ±80VDC

Why can't I log all the channels at 10 kHz?

This is due to the limitation of the CAN bus; when two signals are logged at 10 kHz using a K-Box configured to work on a 1 Mbps CAN bus, the bus load will be maximum.

Why do I need a K-Bob?

K-BoB is a BNC breakout box that needs to be used with K-Box or K-AN8.

Is it possible to connect multiple K-boxes?

Yes, Multiple K-series devices can be Daisy chained; ensure that all the K-Boxes have unique CAN IDs, refer K Series manual for more info.

How can I add a formula or table to an ADC channel?

Refer K-Box Manual

Can K-Box be connected to vehicle CAN Bus?

Connecting the K-Box to the vehicle CAN Bus directly is not recommended since the K-Box will start sending CAN messages to the whole vehicle CAN Network. This can cause issues in the vehicle if the identifiers K-Box used are the same as those used by any other node in the network.