Enabling FTP Upload
Last updated
Last updated
After following the steps from section 2.2.3 Tool Menu (Cloud Settings>> FTP settings):
Available for only ReXgen Air devices.
FTP function can't be enabled along with AWS.
*FTPS- PROT P (Data channel encryption not supported).
Click upload in "Device configuration."
Select the added Mobile settings and FTP settings.
Store data to FTP: Enable data storage (to FTP) using mobile internet.
Mobile: Enter the name defined in the SIM settings.
FTP: Enter the name defined in the server settings.
Check Config Time (sec): Checks for new config on the server (at a given delay).
Send status Time (sec): Updated the status in the given time (at a given delay).
Check Firmware Time (sec): Checks for new firmware on the server (at a given delay). *
Automatic Firmware Update: This enables the firmware to be updated automatically.
Upload All Files Before Sleep: This enables the user to direct the logger to upload all the files to the FTP server before the logger enters sleep mode.
*Will be enabled with the upcoming versions.
Click "Run" to update the configuration.
*Always format the logger's internal storage after sending a configuration with AWS or FTP enabled.
Opens the mobile cloud settings window.
Opens the FTP and cloud settings window.
How to in ReXdesk